Fail to preview CR

Discussion in 'ASP .Net' started by Sze, Jun 8, 2010.

  1. Sze

    Sze Guest

    I can preview the report very well in my PC. however, When I publish to the
    server
    I got the following error

    I had already plug all Crystsal.dll to the bin,
    some news said , install the merge module, I had find the merge module but
    don't know how to do .
    Please help .

    Configuration Error
    Description: An error occurred during the processing of a configuration file
    required to service this request. Please review the specific error details
    below and modify your configuration file appropriately.

    Parser Error Message: Could not load file or assembly
    'CrystalDecisions.ReportAppServer.ClientDoc, Version=10.2.3600.0,
    Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its
    dependencies. The system cannot find the file specified.

    Source Error:

    Line 66: <add assembly="CrystalDecisions.CrystalReports.Engine,
    Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    Line 67: <!--<add assembly="CrystalDecisions.Enterprise.InfoStore,
    Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>-->
    Line 68: <add assembly="CrystalDecisions.ReportAppServer.ClientDoc,
    Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304
    Sze, Jun 8, 2010
    #1
    1. Advertising

  2. Sze

    Mel Weaver Guest

    you must install crystal dll on the server, CRRedist2008_6.msi

    "Sze" <> wrote in message
    news:...
    > I can preview the report very well in my PC. however, When I publish to
    > the server
    > I got the following error
    >
    > I had already plug all Crystsal.dll to the bin,
    > some news said , install the merge module, I had find the merge module but
    > don't know how to do .
    > Please help .
    >
    > Configuration Error
    > Description: An error occurred during the processing of a configuration
    > file required to service this request. Please review the specific error
    > details below and modify your configuration file appropriately.
    >
    > Parser Error Message: Could not load file or assembly
    > 'CrystalDecisions.ReportAppServer.ClientDoc, Version=10.2.3600.0,
    > Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its
    > dependencies. The system cannot find the file specified.
    >
    > Source Error:
    >
    > Line 66: <add assembly="CrystalDecisions.CrystalReports.Engine,
    > Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    > Line 67: <!--<add assembly="CrystalDecisions.Enterprise.InfoStore,
    > Version=10.2.3600.0, Culture=neutral,
    > PublicKeyToken=692FBEA5521E1304"/>-->
    > Line 68: <add
    > assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=10.2.3600.0,
    > Culture=neutral, PublicKeyToken=692fbea5521e1304
    >
    >
    Mel Weaver, Jun 8, 2010
    #2
    1. Advertising

  3. Sze

    Sze Guest

    Thanks for your reply
    Could you tell me How can I install crystall dll on the server ?

    "Mel Weaver" <>
    ???????:uGgv$...
    > you must install crystal dll on the server, CRRedist2008_6.msi
    >
    > "Sze" <> wrote in message
    > news:...
    >> I can preview the report very well in my PC. however, When I publish to
    >> the server
    >> I got the following error
    >>
    >> I had already plug all Crystsal.dll to the bin,
    >> some news said , install the merge module, I had find the merge module
    >> but don't know how to do .
    >> Please help .
    >>
    >> Configuration Error
    >> Description: An error occurred during the processing of a configuration
    >> file required to service this request. Please review the specific error
    >> details below and modify your configuration file appropriately.
    >>
    >> Parser Error Message: Could not load file or assembly
    >> 'CrystalDecisions.ReportAppServer.ClientDoc, Version=10.2.3600.0,
    >> Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its
    >> dependencies. The system cannot find the file specified.
    >>
    >> Source Error:
    >>
    >> Line 66: <add assembly="CrystalDecisions.CrystalReports.Engine,
    >> Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    >> Line 67: <!--<add
    >> assembly="CrystalDecisions.Enterprise.InfoStore, Version=10.2.3600.0,
    >> Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>-->
    >> Line 68: <add
    >> assembly="CrystalDecisions.ReportAppServer.ClientDoc,
    >> Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304
    >>
    >>
    Sze, Jun 9, 2010
    #3
  4. Sze

    Sze Guest

    I found the solution ,
    (1) Create CR setup project
    (2) Run in the server, and its work

    http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-stepbystep.htm


    "Sze" <> ¼¶¼g©ó¶l¥ó·s»D:...
    > Thanks for your reply
    > Could you tell me How can I install crystall dll on the server ?
    >
    > "Mel Weaver" <>
    > ???????:uGgv$...
    >> you must install crystal dll on the server, CRRedist2008_6.msi
    >>
    >> "Sze" <> wrote in message
    >> news:...
    >>> I can preview the report very well in my PC. however, When I publish to
    >>> the server
    >>> I got the following error
    >>>
    >>> I had already plug all Crystsal.dll to the bin,
    >>> some news said , install the merge module, I had find the merge module
    >>> but don't know how to do .
    >>> Please help .
    >>>
    >>> Configuration Error
    >>> Description: An error occurred during the processing of a configuration
    >>> file required to service this request. Please review the specific error
    >>> details below and modify your configuration file appropriately.
    >>>
    >>> Parser Error Message: Could not load file or assembly
    >>> 'CrystalDecisions.ReportAppServer.ClientDoc, Version=10.2.3600.0,
    >>> Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its
    >>> dependencies. The system cannot find the file specified.
    >>>
    >>> Source Error:
    >>>
    >>> Line 66: <add assembly="CrystalDecisions.CrystalReports.Engine,
    >>> Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
    >>> Line 67: <!--<add
    >>> assembly="CrystalDecisions.Enterprise.InfoStore, Version=10.2.3600.0,
    >>> Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>-->
    >>> Line 68: <add
    >>> assembly="CrystalDecisions.ReportAppServer.ClientDoc,
    >>> Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304
    >>>
    >>>

    >
    >
    Sze, Jun 9, 2010
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Herfried K. Wagner [MVP]

    Re: Print Preview and images....

    Herfried K. Wagner [MVP], Aug 19, 2003, in forum: ASP .Net
    Replies:
    0
    Views:
    1,069
    Herfried K. Wagner [MVP]
    Aug 19, 2003
  2. Nightdrive
    Replies:
    1
    Views:
    511
    Michael Griffiths
    Jun 26, 2004
  3. =?Utf-8?B?S2VubmV0aA==?=

    Headers & Footers in print preview

    =?Utf-8?B?S2VubmV0aA==?=, Jan 22, 2004, in forum: ASP .Net
    Replies:
    1
    Views:
    426
    Curt_C [MVP]
    Jan 22, 2004
  4. Dmitriy Bessmertnyy

    Preview of Crystal Report inside Visual Studio .NET

    Dmitriy Bessmertnyy, Mar 5, 2004, in forum: ASP .Net
    Replies:
    0
    Views:
    303
    Dmitriy Bessmertnyy
    Mar 5, 2004
  5. Wenjie

    if (f() != FAIL) or if (FAIL != f())?

    Wenjie, Jul 28, 2003, in forum: C Programming
    Replies:
    3
    Views:
    417
    E. Robert Tisdale
    Jul 31, 2003
Loading...

Share This Page