Failed to start monitoring file changes.

Discussion in 'ASP .Net Web Services' started by Mark, May 4, 2004.

  1. Mark

    Mark Guest

    Hello,

    I have researched and tried every thing I have found on the web, in groups
    and MS KB articles. Here is what I have.

    I have a Windows 2000 Domain Controller all service packs and every thing
    else from windows update.
    ..NET 1.0 and 1.1 installed on the server. Actually .NET was installed
    before the server was made a DC.


    This server is a VMWare virtual machine so when I have the ability to roll
    back all changes and "try" again.


    What I am trying to do is impersonation. I have a VERY simple test site
    that I am using to get impersonation to work on a DC. The site name is
    "test" and the only page is "default.aspx" with the content of "test page".
    Pretty complex I know..... ha

    Now, the web site works perfect with just that content. It will display
    "test page" in the web browser. But if I add a web.config file with
    impersonation added to the web.config i receive the error "Access denied to
    'c:\inetpub\wwwroot\test\Default.aspx'. Failed to start monitoring file
    changes."

    The user that I have added to the impersonation element is none other than
    the Domain administrator account. I am just using it for fun to get this
    stuff to work. The final product will run under a normal user with hopefully
    only the required rights to run the site. But you know what how can I
    figure that out when i can't even get a domain administrator to work in
    impersonation.

    I am loged in as the Administrator created all of the content and testing
    while using the same account to impersonate with. So I do not see how the
    administrator account cannot have access to files IT just created!

    What can I do to allow this user to work? What must I do then to make a
    standard domain user to work. Answers please!! It seems no one knows how or
    why this happens and I have seen where people have burned MSDN support calls
    and STILL do not have a solution.
     
    Mark, May 4, 2004
    #1
    1. Advertising

  2. Check for folder permissions of your account.
    Here you have some useful links about this:

    http://support.microsoft.com/default.aspx?scid=kb;EN-US;317955
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;316721


    --
    Hernan de Lahitte
    Lagash Systems S.A.
    http://weblogs.asp.net/hernandl


    This posting is provided "AS IS" with no warranties, and confers no rights.

    "Mark" <> wrote in message
    news:%...
    > Hello,
    >
    > I have researched and tried every thing I have found on the web, in groups
    > and MS KB articles. Here is what I have.
    >
    > I have a Windows 2000 Domain Controller all service packs and every thing
    > else from windows update.
    > .NET 1.0 and 1.1 installed on the server. Actually .NET was installed
    > before the server was made a DC.
    >
    >
    > This server is a VMWare virtual machine so when I have the ability to roll
    > back all changes and "try" again.
    >
    >
    > What I am trying to do is impersonation. I have a VERY simple test site
    > that I am using to get impersonation to work on a DC. The site name is
    > "test" and the only page is "default.aspx" with the content of "test

    page".
    > Pretty complex I know..... ha
    >
    > Now, the web site works perfect with just that content. It will display
    > "test page" in the web browser. But if I add a web.config file with
    > impersonation added to the web.config i receive the error "Access denied

    to
    > 'c:\inetpub\wwwroot\test\Default.aspx'. Failed to start monitoring file
    > changes."
    >
    > The user that I have added to the impersonation element is none other than
    > the Domain administrator account. I am just using it for fun to get this
    > stuff to work. The final product will run under a normal user with

    hopefully
    > only the required rights to run the site. But you know what how can I
    > figure that out when i can't even get a domain administrator to work in
    > impersonation.
    >
    > I am loged in as the Administrator created all of the content and testing
    > while using the same account to impersonate with. So I do not see how the
    > administrator account cannot have access to files IT just created!
    >
    > What can I do to allow this user to work? What must I do then to make a
    > standard domain user to work. Answers please!! It seems no one knows how

    or
    > why this happens and I have seen where people have burned MSDN support

    calls
    > and STILL do not have a solution.
    >
    >
    >
     
    Hernan de Lahitte, May 4, 2004
    #2
    1. Advertising

  3. Mark

    Mark Guest

    I have read these and tried them. How does a "Domain Administrator" not
    have access? The Domain administrator was the user that created these
    folders. By default this means the administrator is the owner and does have
    access to these folders, correct?

    In my attempts to find where the folder that the Domain administrator did
    not have access I just granted full access on c:\ to the administrator,
    everyone, AND aspnet and the other web user account. I know this is nuts
    but it is a VM and I can roll back the change later. But guess what, it
    STILL gave the same error.

    I am disturbed how other users have posted the same questions as myself do
    not receive a straight answer. Every answer to this same question always
    gets the same answer. Read x, x, x, KB articles download the file monitor
    tool.

    These KB articles did not solve the problem. Somthing else is wrong. If I
    remove the impersonate line the test site works. Add the line the error
    appears. Yes it is the correct password.

    "Hernan de Lahitte" <> wrote in message
    news:euCk%...
    > Check for folder permissions of your account.
    > Here you have some useful links about this:
    >
    > http://support.microsoft.com/default.aspx?scid=kb;EN-US;317955
    > http://support.microsoft.com/default.aspx?scid=kb;EN-US;316721
    >
    >
    > --
    > Hernan de Lahitte
    > Lagash Systems S.A.
    > http://weblogs.asp.net/hernandl
    >
    >
    > This posting is provided "AS IS" with no warranties, and confers no

    rights.
    >
    > "Mark" <> wrote in message
    > news:%...
    > > Hello,
    > >
    > > I have researched and tried every thing I have found on the web, in

    groups
    > > and MS KB articles. Here is what I have.
    > >
    > > I have a Windows 2000 Domain Controller all service packs and every

    thing
    > > else from windows update.
    > > .NET 1.0 and 1.1 installed on the server. Actually .NET was installed
    > > before the server was made a DC.
    > >
    > >
    > > This server is a VMWare virtual machine so when I have the ability to

    roll
    > > back all changes and "try" again.
    > >
    > >
    > > What I am trying to do is impersonation. I have a VERY simple test site
    > > that I am using to get impersonation to work on a DC. The site name is
    > > "test" and the only page is "default.aspx" with the content of "test

    > page".
    > > Pretty complex I know..... ha
    > >
    > > Now, the web site works perfect with just that content. It will display
    > > "test page" in the web browser. But if I add a web.config file with
    > > impersonation added to the web.config i receive the error "Access denied

    > to
    > > 'c:\inetpub\wwwroot\test\Default.aspx'. Failed to start monitoring file
    > > changes."
    > >
    > > The user that I have added to the impersonation element is none other

    than
    > > the Domain administrator account. I am just using it for fun to get

    this
    > > stuff to work. The final product will run under a normal user with

    > hopefully
    > > only the required rights to run the site. But you know what how can I
    > > figure that out when i can't even get a domain administrator to work in
    > > impersonation.
    > >
    > > I am loged in as the Administrator created all of the content and

    testing
    > > while using the same account to impersonate with. So I do not see how

    the
    > > administrator account cannot have access to files IT just created!
    > >
    > > What can I do to allow this user to work? What must I do then to make a
    > > standard domain user to work. Answers please!! It seems no one knows

    how
    > or
    > > why this happens and I have seen where people have burned MSDN support

    > calls
    > > and STILL do not have a solution.
    > >
    > >
    > >

    >
    >
     
    Mark, May 4, 2004
    #3
  4. Mark

    Mark Guest

    I have read these and tried them. How does a "Domain Administrator" not
    have access? The Domain administrator was the user that created these
    folders. By default this means the administrator is the owner and does have
    access to these folders, correct?

    In my attempts to find where the folder that the Domain administrator did
    not have access I just granted full access on c:\ to the administrator,
    everyone, AND aspnet and the other web user account. I know this is nuts
    but it is a VM and I can roll back the change later. But guess what, it
    STILL gave the same error.

    I am disturbed how other users have posted the same questions as myself do
    not receive a straight answer. Every answer to this same question always
    gets the same answer. Read x, x, x, KB articles download the file monitor
    tool.

    These KB articles did not solve the problem. Somthing else is wrong. If I
    remove the impersonate line the test site works. Add the line the error
    appears. Yes it is the correct password.

    "Hernan de Lahitte" <> wrote in message
    news:euCk%...
    > Check for folder permissions of your account.
    > Here you have some useful links about this:
    >
    > http://support.microsoft.com/default.aspx?scid=kb;EN-US;317955
    > http://support.microsoft.com/default.aspx?scid=kb;EN-US;316721
    >
    >
    > --
    > Hernan de Lahitte
    > Lagash Systems S.A.
    > http://weblogs.asp.net/hernandl
    >
    >
    > This posting is provided "AS IS" with no warranties, and confers no

    rights.
    >
    > "Mark" <> wrote in message
    > news:%...
    > > Hello,
    > >
    > > I have researched and tried every thing I have found on the web, in

    groups
    > > and MS KB articles. Here is what I have.
    > >
    > > I have a Windows 2000 Domain Controller all service packs and every

    thing
    > > else from windows update.
    > > .NET 1.0 and 1.1 installed on the server. Actually .NET was installed
    > > before the server was made a DC.
    > >
    > >
    > > This server is a VMWare virtual machine so when I have the ability to

    roll
    > > back all changes and "try" again.
    > >
    > >
    > > What I am trying to do is impersonation. I have a VERY simple test site
    > > that I am using to get impersonation to work on a DC. The site name is
    > > "test" and the only page is "default.aspx" with the content of "test

    > page".
    > > Pretty complex I know..... ha
    > >
    > > Now, the web site works perfect with just that content. It will display
    > > "test page" in the web browser. But if I add a web.config file with
    > > impersonation added to the web.config i receive the error "Access denied

    > to
    > > 'c:\inetpub\wwwroot\test\Default.aspx'. Failed to start monitoring file
    > > changes."
    > >
    > > The user that I have added to the impersonation element is none other

    than
    > > the Domain administrator account. I am just using it for fun to get

    this
    > > stuff to work. The final product will run under a normal user with

    > hopefully
    > > only the required rights to run the site. But you know what how can I
    > > figure that out when i can't even get a domain administrator to work in
    > > impersonation.
    > >
    > > I am loged in as the Administrator created all of the content and

    testing
    > > while using the same account to impersonate with. So I do not see how

    the
    > > administrator account cannot have access to files IT just created!
    > >
    > > What can I do to allow this user to work? What must I do then to make a
    > > standard domain user to work. Answers please!! It seems no one knows

    how
    > or
    > > why this happens and I have seen where people have burned MSDN support

    > calls
    > > and STILL do not have a solution.
    > >
    > >
    > >

    >
    >
     
    Mark, May 4, 2004
    #4
  5. Mark

    Mark Guest

    Here is a small story of what I am doing.

    I have a virtual machine Windows 2000 Enterprise server with .NET 1.0 and
    1.1 installed and was upgraded to a DC.

    1. Log in as Administrator
    2. Create a folder C:\Inetpub\wwwroot\test
    3. Create a file "default.aspx" content of the file is "hello world"
    4. Load up Internet Information Services
    5. Create "test" to be a web application or what ever that step would be
    called. I click on the "create" button in the properties of "test"
    6. Grant the user iwam_machinename to the
    "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\Temporary ASP.NET Files" folder
    because it genreated a permission error when running the site.
    7. Load up IE and access http://localhost/test and it works. The site
    displays "hello world"

    8. Create web.config with impersonate data. The user in the impersonate is
    the Domain administrator account that is currently being used.
    9. Accessing the site gives the error "Access denied to
    'c:\inetpub\wwwroot\test\Default.aspx'. Failed to start monitoring file
    changes."

    WHY, WHY does this error happen?

    When these same steps are performed on another VM that is a DC it actually
    works. The same problem was not able to be reproduced. I have seen this
    problem before so it is not a rare occurance with just this VM or my
    install. It has happened when another network tech installed a windows DC
    and another developer tried to setup an impersonate site. Same error and we
    could not resolve the error so the machine was rebuilt. There are going to
    be times where we will not be able to just "rebuild" the machine and the
    problem has to be resolved.

    In attempts to "fix" the problem
    * aspnet_regiis -i was ran. Same result.
    * .NET 1.0 and 1.1 uninstalled and reinstalled .NET 1.1. Same error still.
    * Granting full control on c:\ just for kicks on everyone and administrator
    and other user accounts. same error.


    How can this be fixed on a server with out a rebuild of the server?
     
    Mark, May 4, 2004
    #5
  6. Mark

    Ken Schaefer Guest

    Please use the Sysinternals Filemon tool to see what file is generating the
    Access denied error, and which account is being used to access the file.
    That will give you some idea as to why you are getting this error.

    Cheers
    Ken

    "Mark" <> wrote in message
    news:...
    : Here is a small story of what I am doing.
    :
    : I have a virtual machine Windows 2000 Enterprise server with .NET 1.0 and
    : 1.1 installed and was upgraded to a DC.
    :
    : 1. Log in as Administrator
    : 2. Create a folder C:\Inetpub\wwwroot\test
    : 3. Create a file "default.aspx" content of the file is "hello world"
    : 4. Load up Internet Information Services
    : 5. Create "test" to be a web application or what ever that step would be
    : called. I click on the "create" button in the properties of "test"
    : 6. Grant the user iwam_machinename to the
    : "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\Temporary ASP.NET Files"
    folder
    : because it genreated a permission error when running the site.
    : 7. Load up IE and access http://localhost/test and it works. The site
    : displays "hello world"
    :
    : 8. Create web.config with impersonate data. The user in the impersonate
    is
    : the Domain administrator account that is currently being used.
    : 9. Accessing the site gives the error "Access denied to
    : 'c:\inetpub\wwwroot\test\Default.aspx'. Failed to start monitoring file
    : changes."
    :
    : WHY, WHY does this error happen?
    :
    : When these same steps are performed on another VM that is a DC it actually
    : works. The same problem was not able to be reproduced. I have seen this
    : problem before so it is not a rare occurance with just this VM or my
    : install. It has happened when another network tech installed a windows DC
    : and another developer tried to setup an impersonate site. Same error and
    we
    : could not resolve the error so the machine was rebuilt. There are going
    to
    : be times where we will not be able to just "rebuild" the machine and the
    : problem has to be resolved.
    :
    : In attempts to "fix" the problem
    : * aspnet_regiis -i was ran. Same result.
    : * .NET 1.0 and 1.1 uninstalled and reinstalled .NET 1.1. Same error
    still.
    : * Granting full control on c:\ just for kicks on everyone and
    administrator
    : and other user accounts. same error.
    :
    :
    : How can this be fixed on a server with out a rebuild of the server?
    :
    :
    :
     
    Ken Schaefer, May 5, 2004
    #6
  7. Mark

    Mark Guest

    I must admit I did use it, but this time.. I REALLY used the tool now. So,
    here is what I have found. The following is a snipit from the log.

    The Domain is "Win2000DC"
    The aspnet_wp user "Win2000DC\IWAM_Wrongway"

    The result from aspnet_wp.exe accessing the
    C:\inetpub\wwwroot\test\Default.aspx is 0xC00000A5

    0xC00000A5 = 0 0xc00000a5 0x001f0003 NT_STATUS_BAD_IMPERSONATION_LEVEL

    I have not a clue what this means or how to solve this.

    In the web.config i have the following under <system.web>

    <identity impersonate="true"
    userName="Win2000DC\administrator"
    password="password" />

    What is crazy is that the same default.aspx and web.config work on another
    DC, yet we are unable to get it working on this DC. I have granted the
    IWAM_Wrongway user access to c:\, c:\inetpub, c:\inetpub\wwwroot,
    c:\inetpub\wwwroot\test and the same result is returned.

    14 7:09:25 AM inetinfo.exe:1916 OPEN C:\INETPUB\WWWROOT\TEST\DEFAULT.HTM
    FILE NOT FOUND Options: Open Access: All
    15 7:09:25 AM inetinfo.exe:1916 OPEN C:\INETPUB\WWWROOT\TEST\DEFAULT.ASP
    FILE NOT FOUND Options: Open Access: All
    16 7:09:25 AM inetinfo.exe:1916 OPEN C:\INETPUB\WWWROOT\TEST\IISSTART.ASP
    FILE NOT FOUND Options: Open Access: All
    17 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    18 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    19 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    C:\inetpub\wwwroot\test\global.asax FILE NOT FOUND Attributes: Error
    20 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    21 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    22 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    23 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    24 7:09:25 AM aspnet_wp.exe:1420 OPEN
    C:\winnt\microsoft.net\framework\v1.1.4322\Config\machine.config *
    0xC00000A5 Options: Open Access: All
    25 7:09:25 AM aspnet_wp.exe:1420 OPEN
    C:\winnt\microsoft.net\framework\v1.1.4322\Config\machine.config *
    0xC00000A5 Options: Open Access: All
    26 7:09:25 AM aspnet_wp.exe:1420 OPEN
    C:\winnt\microsoft.net\framework\v1.1.4322\Config\machine.config *
    0xC00000A5 Options: Open Access: All
    27 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    28 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    29 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    30 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error

    "Ken Schaefer" <> wrote in message
    news:...
    > Please use the Sysinternals Filemon tool to see what file is generating

    the
    > Access denied error, and which account is being used to access the file.
    > That will give you some idea as to why you are getting this error.
    >
    > Cheers
    > Ken
    >
    > "Mark" <> wrote in message
    > news:...
    > : Here is a small story of what I am doing.
    > :
    > : I have a virtual machine Windows 2000 Enterprise server with .NET 1.0

    and
    > : 1.1 installed and was upgraded to a DC.
    > :
    > : 1. Log in as Administrator
    > : 2. Create a folder C:\Inetpub\wwwroot\test
    > : 3. Create a file "default.aspx" content of the file is "hello world"
    > : 4. Load up Internet Information Services
    > : 5. Create "test" to be a web application or what ever that step would

    be
    > : called. I click on the "create" button in the properties of "test"
    > : 6. Grant the user iwam_machinename to the
    > : "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\Temporary ASP.NET Files"
    > folder
    > : because it genreated a permission error when running the site.
    > : 7. Load up IE and access http://localhost/test and it works. The site
    > : displays "hello world"
    > :
    > : 8. Create web.config with impersonate data. The user in the

    impersonate
    > is
    > : the Domain administrator account that is currently being used.
    > : 9. Accessing the site gives the error "Access denied to
    > : 'c:\inetpub\wwwroot\test\Default.aspx'. Failed to start monitoring file
    > : changes."
    > :
    > : WHY, WHY does this error happen?
    > :
    > : When these same steps are performed on another VM that is a DC it

    actually
    > : works. The same problem was not able to be reproduced. I have seen

    this
    > : problem before so it is not a rare occurance with just this VM or my
    > : install. It has happened when another network tech installed a windows

    DC
    > : and another developer tried to setup an impersonate site. Same error

    and
    > we
    > : could not resolve the error so the machine was rebuilt. There are going
    > to
    > : be times where we will not be able to just "rebuild" the machine and the
    > : problem has to be resolved.
    > :
    > : In attempts to "fix" the problem
    > : * aspnet_regiis -i was ran. Same result.
    > : * .NET 1.0 and 1.1 uninstalled and reinstalled .NET 1.1. Same error
    > still.
    > : * Granting full control on c:\ just for kicks on everyone and
    > administrator
    > : and other user accounts. same error.
    > :
    > :
    > : How can this be fixed on a server with out a rebuild of the server?
    > :
    > :
    > :
    >
    >
     
    Mark, May 5, 2004
    #7
  8. Mark

    Mark Guest

    So, the grand answer to this problem is.....
    http://support.microsoft.com/default.aspx?scid=kb;en-us;824308

    Now, this hopefully is documented that when you receive the "failed to start
    monitoring file changes" and if you use the FileMon tool and see the result
    code 0xC00000A5 you should check out the kb article 824308

    "Mark" <> wrote in message
    news:...
    > I must admit I did use it, but this time.. I REALLY used the tool now.

    So,
    > here is what I have found. The following is a snipit from the log.
    >
    > The Domain is "Win2000DC"
    > The aspnet_wp user "Win2000DC\IWAM_Wrongway"
    >
    > The result from aspnet_wp.exe accessing the
    > C:\inetpub\wwwroot\test\Default.aspx is 0xC00000A5
    >
    > 0xC00000A5 = 0 0xc00000a5 0x001f0003 NT_STATUS_BAD_IMPERSONATION_LEVEL
    >
    > I have not a clue what this means or how to solve this.
    >
    > In the web.config i have the following under <system.web>
    >
    > <identity impersonate="true"
    > userName="Win2000DC\administrator"
    > password="password" />
    >
    > What is crazy is that the same default.aspx and web.config work on another
    > DC, yet we are unable to get it working on this DC. I have granted the
    > IWAM_Wrongway user access to c:\, c:\inetpub, c:\inetpub\wwwroot,
    > c:\inetpub\wwwroot\test and the same result is returned.
    >
    > 14 7:09:25 AM inetinfo.exe:1916 OPEN C:\INETPUB\WWWROOT\TEST\DEFAULT.HTM
    > FILE NOT FOUND Options: Open Access: All
    > 15 7:09:25 AM inetinfo.exe:1916 OPEN C:\INETPUB\WWWROOT\TEST\DEFAULT.ASP
    > FILE NOT FOUND Options: Open Access: All
    > 16 7:09:25 AM inetinfo.exe:1916 OPEN C:\INETPUB\WWWROOT\TEST\IISSTART.ASP
    > FILE NOT FOUND Options: Open Access: All
    > 17 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    > C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    > 18 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    > C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    > 19 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    > C:\inetpub\wwwroot\test\global.asax FILE NOT FOUND Attributes: Error
    > 20 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    > C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    > 21 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    > C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    > 22 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    > C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    > 23 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    > C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    > 24 7:09:25 AM aspnet_wp.exe:1420 OPEN
    > C:\winnt\microsoft.net\framework\v1.1.4322\Config\machine.config *
    > 0xC00000A5 Options: Open Access: All
    > 25 7:09:25 AM aspnet_wp.exe:1420 OPEN
    > C:\winnt\microsoft.net\framework\v1.1.4322\Config\machine.config *
    > 0xC00000A5 Options: Open Access: All
    > 26 7:09:25 AM aspnet_wp.exe:1420 OPEN
    > C:\winnt\microsoft.net\framework\v1.1.4322\Config\machine.config *
    > 0xC00000A5 Options: Open Access: All
    > 27 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    > C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    > 28 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    > C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    > 29 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    > C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    > 30 7:09:25 AM aspnet_wp.exe:1420 QUERY INFORMATION
    > C:\inetpub\wwwroot\test\Default.aspx * 0xC00000A5 Attributes: Error
    >
    > "Ken Schaefer" <> wrote in message
    > news:...
    > > Please use the Sysinternals Filemon tool to see what file is generating

    > the
    > > Access denied error, and which account is being used to access the file.
    > > That will give you some idea as to why you are getting this error.
    > >
    > > Cheers
    > > Ken
    > >
    > > "Mark" <> wrote in message
    > > news:...
    > > : Here is a small story of what I am doing.
    > > :
    > > : I have a virtual machine Windows 2000 Enterprise server with .NET 1.0

    > and
    > > : 1.1 installed and was upgraded to a DC.
    > > :
    > > : 1. Log in as Administrator
    > > : 2. Create a folder C:\Inetpub\wwwroot\test
    > > : 3. Create a file "default.aspx" content of the file is "hello world"
    > > : 4. Load up Internet Information Services
    > > : 5. Create "test" to be a web application or what ever that step would

    > be
    > > : called. I click on the "create" button in the properties of "test"
    > > : 6. Grant the user iwam_machinename to the
    > > : "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\Temporary ASP.NET Files"
    > > folder
    > > : because it genreated a permission error when running the site.
    > > : 7. Load up IE and access http://localhost/test and it works. The

    site
    > > : displays "hello world"
    > > :
    > > : 8. Create web.config with impersonate data. The user in the

    > impersonate
    > > is
    > > : the Domain administrator account that is currently being used.
    > > : 9. Accessing the site gives the error "Access denied to
    > > : 'c:\inetpub\wwwroot\test\Default.aspx'. Failed to start monitoring

    file
    > > : changes."
    > > :
    > > : WHY, WHY does this error happen?
    > > :
    > > : When these same steps are performed on another VM that is a DC it

    > actually
    > > : works. The same problem was not able to be reproduced. I have seen

    > this
    > > : problem before so it is not a rare occurance with just this VM or my
    > > : install. It has happened when another network tech installed a

    windows
    > DC
    > > : and another developer tried to setup an impersonate site. Same error

    > and
    > > we
    > > : could not resolve the error so the machine was rebuilt. There are

    going
    > > to
    > > : be times where we will not be able to just "rebuild" the machine and

    the
    > > : problem has to be resolved.
    > > :
    > > : In attempts to "fix" the problem
    > > : * aspnet_regiis -i was ran. Same result.
    > > : * .NET 1.0 and 1.1 uninstalled and reinstalled .NET 1.1. Same error
    > > still.
    > > : * Granting full control on c:\ just for kicks on everyone and
    > > administrator
    > > : and other user accounts. same error.
    > > :
    > > :
    > > : How can this be fixed on a server with out a rebuild of the server?
    > > :
    > > :
    > > :
    > >
    > >

    >
    >
     
    Mark, May 5, 2004
    #8
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Carl Prothman [MVP]
    Replies:
    1
    Views:
    4,272
    Ali_ggl
    Mar 17, 2008
  2. Edward Yang
    Replies:
    1
    Views:
    4,145
    Jose Marcenaro
    Feb 20, 2004
  3. Mark
    Replies:
    7
    Views:
    4,940
  4. Robin
    Replies:
    1
    Views:
    3,067
    JustMe
    Oct 4, 2004
  5. Jay Ge
    Replies:
    5
    Views:
    851
    Karl Seguin
    Nov 17, 2004
Loading...

Share This Page