Getting Apache error when trying to load mod_ruby

Discussion in 'Ruby' started by laredotornado@zipmail.com, Jan 16, 2008.

  1. Guest

    Hi,

    I'm using Apache 2.2 on Fedora Core 6 Linux. I'm using ruby 1.8.6 and
    mod_ruby 1.2.5. I get this error when starting Apache:

    [Wed Jan 16 09:40:26 2008] [error] mod_ruby: failed to require apache/
    ruby-run
    [Wed Jan 16 09:40:26 2008] [error] mod_ruby: error in ruby
    [Wed Jan 16 09:40:26 2008] [error] mod_ruby: ruby:0:in `require': no
    such file to load -- apache/ruby-run (LoadError)

    Does anyone know what could be causing this? I'm including my
    httpd.conf file if that is useful:

    ==================Begin httpd.conf file========================
    #
    # This is the main Apache HTTP server configuration file. It contains
    the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are
    unsure
    # consult the online docs. You have been warned.
    #
    # Configuration and logfile names: If the filenames you specify for
    many
    # of the server's control files begin with "/" (or "drive:/" for
    Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/usr/local/apache2" will be interpreted by
    the
    # server as "/usr/local/apache2/logs/foo.log".

    #
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile
    directive
    # at a local disk. If you wish to share the same ServerRoot for
    multiple
    # httpd daemons, you will need to change at least LockFile and
    PidFile.
    #
    ServerRoot "/usr/local/apache2"

    #
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    #
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #
    #Listen 12.34.56.78:80
    Listen 80
    Listen 443
    <VirtualHost _default_:443>
    ServerName http://remandev.no-ip.org
    SSLEngine on
    SSLCertificateFile /usr/local/apache2/ssl/remandev.no-ip.org.cert
    SSLCertificateKeyFile /usr/local/apache2/ssl/remandev.no-ip.org.key
    </VirtualHost>

    #
    # Dynamic Shared Object (DSO) Support
    #
    # To be able to use the functionality of a module which was built as a
    DSO you
    # have to place corresponding `LoadModule' lines at this location so
    the
    # directives contained in it are actually available _before_ they are
    used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    #
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule php4_module modules/libphp4.so
    #

    AddType application/x-httpd-php .php .phtml
    AddType application/x-httpd-php-source .phps

    # Allow for ssl
    #LoadModule ssl_module modules/libmodssl.so

    <IfModule !mpm_netware_module>
    #
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    #
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    #
    User daemon
    Group daemon
    </IfModule>

    # 'Main' server configuration
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #

    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g.
    #
    ServerAdmin

    #
    # ServerName gives the name and port that the server uses to identify
    itself.
    # This can often be determined automatically, but we recommend you
    specify
    # it explicitly to prevent problems during startup.
    #
    # If your host doesn't have a registered DNS name, enter its IP
    address here.
    #
    #ServerName www.example.com:80

    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory,
    but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot "/usr/local/apache2/htdocs"

    #
    # Each directory to which Apache has access can be configured with
    respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    #
    # First, we configure the "default" to be a very restrictive set of
    # features.
    #
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    </Directory>

    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #

    #
    # This should be changed to whatever you set DocumentRoot to.
    #
    <Directory "/usr/local/apache2/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
    MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options
    All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important. Please
    see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed
    in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

    </Directory>

    #
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    #
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>

    #
    # The following lines prevent .htaccess and .htpasswd files from
    being
    # viewed by Web clients.
    #
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </FilesMatch>

    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a
    <VirtualHost>
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog logs/error_log

    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn

    <IfModule log_config_module>
    #
    # The following directives define some format nicknames for use
    with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
    Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-
    Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile
    Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog logs/access_log common

    #
    # If you prefer a logfile with access, agent, and referer
    information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog logs/access_log combined
    </IfModule>

    <IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used
    to
    # exist in your server's namespace, but do not anymore. The
    client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server
    scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications
    and
    # run by the server when requested rather than as documents sent
    to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"

    </IfModule>

    <IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
    </IfModule>

    #
    # "/usr/local/apache2/cgi-bin" should be changed to whatever your
    ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "/usr/local/apache2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>

    #
    # DefaultType: the default MIME type the server will use for a
    document
    # if it cannot otherwise determine one, such as from filename
    extensions.
    # If your server contains mostly text or HTML documents, "text/plain"
    is
    # a good value. If most of your content is binary, such as
    applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain

    <IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings
    from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to
    "handlers":
    # actions unrelated to filetype. These can be either built into
    the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options"
    directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the
    client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options"
    directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>

    #
    # The mod_mime_magic module allows the server to use various hints
    from the
    # contents of the file itself to determine its type. The
    MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    #MIMEMagicFile conf/magic

    #
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    #
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    #

    #
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #
    #EnableMMAP off
    #EnableSendfile off

    # Supplemental configuration
    #
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default
    configuration of
    # the server, or you may simply copy their contents here and change
    as
    # necessary.

    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf

    # Multi-language error messages
    #Include conf/extra/httpd-multilang-errordoc.conf

    # Fancy directory listings
    #Include conf/extra/httpd-autoindex.conf

    # Language settings
    #Include conf/extra/httpd-languages.conf

    # User home directories
    #Include conf/extra/httpd-userdir.conf

    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf

    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf

    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf

    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf

    # Various default settings
    #Include conf/extra/httpd-default.conf

    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    #
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random
    equivalent
    # but a statically compiled-in mod_ssl.
    #
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>

    Include /usr/local/tomcat/conf/auto/mod_jk.conf

    # Where to find workers.properties
    JkWorkersFile /usr/local/apache2/workers.properties

    # Where to put jk logs
    JkLogFile logs/mod_jk.log

    # Set the jk log level [debug/error/info]
    JkLogLevel info

    # Select the log format
    JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "

    # JkOptions indicate to send SSL KEY SIZE,
    JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories

    # JkRequestLogFormat set the request format
    JkRequestLogFormat "%w %V %T"

    # Globally deny access to the WEB-INF directory
    <LocationMatch '.*WEB-INF.*'>
    AllowOverride None
    deny from all
    </LocationMatch>

    # Send servlet for context /servlets-examples to worker named worker1
    JkMount /*/servlet/* worker1
    # Send JSPs for context /jsp-examples to worker named worker1
    JkMount /*.jsp worker1
    ==================End httpd.conf file=========================


    Thanks, - Dave
     
    , Jan 16, 2008
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. David Heinemeier Hansson

    Memory consumption of Ruby/mod_ruby combo on Apache

    David Heinemeier Hansson, Sep 9, 2003, in forum: Ruby
    Replies:
    3
    Views:
    114
    Fritz Heinrichmeyer
    Sep 10, 2003
  2. David Heinemeier Hansson
    Replies:
    0
    Views:
    115
    David Heinemeier Hansson
    Feb 13, 2004
  3. Dr. Ephemeron

    mod_ruby & Apache

    Dr. Ephemeron, Mar 4, 2004, in forum: Ruby
    Replies:
    4
    Views:
    167
    Dr. Ephemeron
    Mar 4, 2004
  4. Robert McKinnon
    Replies:
    1
    Views:
    213
    Dave Thomas
    Mar 6, 2004
  5. George Moschovitis

    mod_ruby and Apache ForceType

    George Moschovitis, Jun 22, 2004, in forum: Ruby
    Replies:
    2
    Views:
    170
    Dick Davies
    Jun 23, 2004
Loading...

Share This Page