PCI core and Cyclone

R

Roberto Gallo

Hello

I am wondering if it is feasible to use a PCI 32bit target Altera
Megacore with a Low Speed Cyclone device, EP1C6 grade -8. Is this FPGA fast
enough?

Roberto Gallo
 
D

dbtid

Roberto said:
Hello

I am wondering if it is feasible to use a PCI 32bit target Altera
Megacore with a Low Speed Cyclone device, EP1C6 grade -8. Is this FPGA fast
enough?

Roberto Gallo

Well, my earlier design (Leonardo for synthesis -- blech!) and Quartus
for P&R... fmax was more than 90MHz for the -8 part IIRC. Target PSI
only. We're moving to master/target, but we're only 33 MHz, so I'm not
worried.

If you want to do 66MHz, you might want to call Altera.

HTH
 
R

Roberto Gallo

Thank you.

dbtid said:
Well, my earlier design (Leonardo for synthesis -- blech!) and Quartus
for P&R... fmax was more than 90MHz for the -8 part IIRC. Target PSI
only. We're moving to master/target, but we're only 33 MHz, so I'm not
worried.

If you want to do 66MHz, you might want to call Altera.

HTH
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Members online

Forum statistics

Threads
473,744
Messages
2,569,482
Members
44,900
Latest member
Nell636132

Latest Threads

Top