REQ: Perl 5.8.3 on OpenBSD

Discussion in 'Perl Misc' started by Newsgroup User, Mar 6, 2004.

  1. -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    I am running OpenBSD 3.4 and this is the optput from the compilation
    process:


    bash-2.05b# vi README

    bash-2.05b# vi INSTALL

    bash-2.05b# rm -f configure.sh

    bash-2.05b# rm -f Policy.sh

    bash-2.05b# sh Configure -de
    (I see you are using the Korn shell. Some ksh's blow up on
    Configure,
    mainly on older exotic systems. If yours does, try the Bourne shell
    instead.)

    Beginning of configuration questions for perl5.

    Checking echo to see how to suppress newlines...
    ....using \c
    The star should be here-->*

    First let's make sure your kit is complete. Checking...
    Looks good...


    Would you like to see the instructions? [n]

    Locating common programs...
    awk is in /usr/bin/awk.
    cat is in /bin/cat.
    chmod is in /bin/chmod.
    comm is in /usr/bin/comm.
    cp is in /bin/cp.
    echo is in /bin/echo.
    expr is in /bin/expr.
    grep is in /usr/bin/grep.
    ls is in /bin/ls.
    mkdir is in /bin/mkdir.
    rm is in /bin/rm.
    sed is in /usr/bin/sed.
    sort is in /usr/bin/sort.
    touch is in /usr/bin/touch.
    tr is in /usr/bin/tr.
    uniq is in /usr/bin/uniq.

    Don't worry if any of the following aren't found...
    I don't see Mcc out there, offhand.
    ar is in /usr/bin/ar.
    I don't see bison out there, either.
    I don't see byacc out there, either.
    cpp is in /usr/bin/cpp.
    csh is in /bin/csh.
    date is in /bin/date.
    egrep is in /usr/bin/egrep.
    I don't see gmake out there, either.
    gzip is in /usr/bin/gzip.
    less is in /usr/bin/less.
    ln is in /bin/ln.
    make is in /usr/bin/make.
    more is in /usr/bin/more.
    nm is in /usr/bin/nm.
    nroff is in /usr/bin/nroff.
    I don't see pg out there, either.
    test is in /bin/test.
    uname is in /usr/bin/uname.
    I don't see zip out there, either.
    Using the test built into your sh.

    Checking compatibility between /bin/echo and builtin echo (if any)...
    They are not compatible! You are probably running ksh on a non-USG
    system.
    I'll have to use /bin/echo instead of the builtin, since Bourne shell
    doesn't
    have echo built in and we may have to run some Bourne shell scripts.
    That
    means I'll have to use '-n' to suppress newlines now. Life is
    ridiculous.

    The star should be here-->*

    Symbolic links are supported.

    Checking how to test for symbolic links...
    You can test for symbolic links with 'test -h'.


    Good, your tr supports [:lower:] and [:upper:] to convert case.
    Using [:upper:] and [:lower:] to convert case.

    First time through, eh? I have some defaults handy for some systems
    that need some extra help getting the Configure answers right:

    3b1 dynix isc_2 opus
    sunos_4_1
    aix dynixptx linux os2
    super-ux
    altos486 epix lynxos os390 svr4
    amigaos esix4 machten os400 svr5
    apollo fps machten_2 posix-bc
    ti1500
    atheos freebsd mint powerux
    titanos
    aux_3 genix mips qnx
    ultrix_4
    beos gnu mpc rhapsody umips
    bsdos greenhills mpeix sco
    unicos
    convexos hpux ncr_tower sco_2_3_0
    unicosmk
    cxux i386 netbsd sco_2_3_1
    unisysdynix
    cygwin irix_4 newsos4 sco_2_3_2 utekv
    darwin irix_5 next_3 sco_2_3_3 uts
    dcosx irix_6 next_3_0 sco_2_3_4 uwin
    dec_osf irix_6_0 next_4 solaris_2 vmesa
    dgux irix_6_1 nonstopux stellar vos
    dos_djgpp isc openbsd sunos_4_0

    You may give one or more space-separated answers, or "none" if
    appropriate.
    A well-behaved OS will have no hints, so answering "none" or just
    "Policy"
    is a good thing. DO NOT give a wrong version or a wrong OS.

    Which of these apply, if any? [openbsd]

    Configure uses the operating system name and version to set some
    defaults.
    The default value is probably right if the name rings a bell.
    Otherwise,
    since spelling matters for me, either accept the default or answer
    "none"
    to leave it blank.

    Operating system name? [openbsd]

    Operating system version? [3.4]

    Perl can be built to use the SOCKS proxy protocol library. To do so,
    Configure must be run with -Dusesocks. If you use SOCKS you also
    need
    to use the PerlIO abstraction layer, this will be implicitly
    selected.

    If this doesn't make any sense to you, just accept the default 'n'.
    Build Perl for SOCKS? [n]

    Previous version of perl5 used the standard IO mechanisms as
    defined in <stdio.h>. Versions 5.003_02 and later of perl5 allow
    alternate IO mechanisms via the PerlIO abstraction layer, but the
    stdio mechanism is still available if needed. The abstraction layer
    can use AT&T's sfio (if you already have sfio installed) or regular
    stdio.
    Using PerlIO with sfio may cause problems with some extension
    modules.

    If this doesn't make any sense to you, just accept the default 'y'.
    Use the PerlIO abstraction layer? [y]

    Perl can be built to take advantage of threads on some systems.
    To do so, Configure can be run with -Dusethreads.

    Note that Perl built with threading support runs slightly slower
    and uses more memory than plain Perl. The current implementation
    is believed to be stable, but it is fairly new, and so should be
    treated with caution.

    If this doesn't make any sense to you, just accept the default 'n'.
    Build a threading Perl? [n]
    Your platform has some specific hints regarding threaded builds,
    using them...

    Perl can be built so that multiple Perl interpreters can coexist
    within the same Perl executable.

    If this doesn't make any sense to you, just accept the default 'n'.
    Build Perl for multiplicity? [n]

    Hmm... Looks kind of like a BSD system, but we'll see...

    Congratulations. You aren't running Eunice.

    It's not Xenix...

    Nor is it Venix...
    Use which C compiler? [cc]

    Checking for GNU cc in disguise and/or its version number...
    You are using GNU cc 2.95.3 20010125 (prerelease, propolice).

    Hmm... Doesn't look like a MIPS system.

    Now, how can we feed standard input to your C preprocessor...
    Maybe "cc -E" will work...
    Nope...maybe "cc -E -" will work...
    Yup, it does.

    Some systems have incompatible or broken versions of libraries.
    Among
    the directories listed in the question below, please remove any you
    know not to be holding relevant libraries, and add any that are
    needed.
    Say "none" for none.

    Directories to use for library searches? [/usr/local/lib /usr/lib]

    On some systems, shared libraries may be available. Answer 'none' if
    you want to suppress searching of shared libraries for the remainder
    of this configuration.

    What is the file extension used for shared libraries? [so]

    Perl can be built to take advantage of long doubles which
    (if available) may give more accuracy and range for floating point
    numbers.

    If this doesn't make any sense to you, just accept the default 'n'.
    Try to use long doubles if available? [n]

    Checking for optional libraries...
    No -lsfio.
    No -lsocket.
    Found -lbind.
    No -linet.
    No -lnsl.
    No -lnm.
    No -lndbm.
    Found -lgdbm.
    No -ldbm.
    No -ldb.
    No -lmalloc.
    No -ldld.
    No -lld.
    No -lsun.
    Found -lm.
    No -lsec.
    Found -lutil.
    Found -lc.
    No -lcposix.
    No -lposix.
    No -lucb.
    No -lbsd.
    No -lBSD.

    In order to compile perl5 on your machine, a number of libraries
    are usually needed. Include any other special libraries here as
    well.
    Say "none" for none. The default list is almost always right.

    What libraries to use? [-lbind -lgdbm -lm -lutil -lc]

    By default, perl5 compiles with the -O flag to use the optimizer.
    Alternately, you might want to use the symbolic debugger, which uses
    the -g flag (on traditional Unix systems). Either flag can be
    specified here. To use neither flag, specify the word "none".

    What optimizer/debugger flag should be used? [-O2]

    Checking if your compiler accepts -fno-strict-aliasing
    Yes, it does.

    Your C compiler may want other flags. For this question you should
    include
    - -I/whatever and -DWHATEVER flags and any other flags used by the C
    compiler,
    but you should NOT include libraries or ld flags like -lwhatever. If
    you
    want perl5 to honor its debug switch, you should include -DDEBUGGING
    here.
    Your C compiler might also need additional flags, such as
    - -D_POSIX_SOURCE.

    To use no flags, specify the word "none".

    Any additional cc flags? [-fno-strict-aliasing -I/usr/local/include]

    Let me guess what the preprocessor flags are...
    They appear to be: -fno-strict-aliasing -I/usr/local/include

    Your C linker may need flags. For this question you should
    include -L/whatever and any other flags used by the C linker, but you
    should NOT include libraries like -lwhatever.

    Make sure you include the appropriate -L/path flags if your C linker
    does not normally search all of the directories you specified above,
    namely
    /usr/local/lib /usr/lib
    To use no flags, specify the word "none".

    Any additional ld flags (NOT including libraries)?
    [-Wl,-E -L/usr/local/lib]

    Checking your choice of C compiler and flags for coherency...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    OK, that should do.

    Computing filename position in cpp output for #include directives...
    Your cpp writes the filename in the third field of the line.

    <stdlib.h> found.

    Checking to see how big your integers are...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your integers are 4 bytes long.
    Your long integers are 4 bytes long.
    Your short integers are 2 bytes long.

    Checking to see if you have long long...
    You have long long.

    Checking to see how big your long longs are...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your long longs are 8 bytes long.

    <inttypes.h> found.

    Checking to see if you have int64_t...
    You have int64_t.

    Checking which 64-bit integer type we could use...
    We could use 'long long' for 64-bit integers.

    Perl can be built to take advantage of 64-bit integer types
    on some systems. To do so, Configure can be run with -Duse64bitint.
    Choosing this option will most probably introduce binary
    incompatibilities.

    If this doesn't make any sense to you, just accept the default 'n'.
    (The default has been chosen based on your configuration.)
    Try to use 64-bit integers, if available? [n]

    You may also choose to try maximal 64-bitness. It means using as
    much
    64-bitness as possible on the platform. This in turn means even more
    binary incompatibilities. On the other hand, your platform may not
    have any more 64-bitness available than what you already have chosen.

    If this doesn't make any sense to you, just accept the default 'n'.
    (The default has been chosen based on your configuration.)
    Try to use maximal 64-bit support, if available? [n]

    Checking to see how big your double precision numbers are...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your double is 8 bytes long.

    Checking to see if you have long double...
    You have long double.

    Checking to see how big your long doubles are...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your long doubles are 12 bytes long.

    What is your architecture name [OpenBSD.i386-openbsd]
    Perlio selected.

    By default, perl5 will be installed in /usr/local/bin, manual pages
    under /usr/local/man, etc..., i.e. with /usr/local as prefix for all
    installation directories. Typically this is something like
    /usr/local.
    If you wish to have binaries under /usr/bin but other parts of the
    installation under /usr/local, that's ok: you will be prompted
    separately for each of the installation directories, the prefix being
    only used to set the defaults.

    Installation prefix to use? (~name ok) [/usr/local]

    AFS does not seem to be running...

    In some special cases, particularly when building perl5 for
    distribution,
    it is convenient to distinguish the directory in which files should
    be
    installed from the directory (/usr/local) in which they will
    eventually reside. For most users, these two directories are the
    same.

    What installation prefix should I use for installing files? (~name
    ok)
    [/usr/local]

    Getting the current patchlevel...
    (You have perl5 version 8 subversion 3.)

    There are some auxiliary files for perl5 that need to be put into a
    private library directory that is accessible by everyone.

    Pathname where the private library files will reside? (~name ok)
    [/usr/local/lib/perl5/5.8.3]

    Perl5 contains architecture-dependent library files. If you are
    sharing libraries in a heterogeneous environment, you might store
    these files in a separate location. Otherwise, you can just include
    them with the rest of the public library files.

    Where do you want to put the public architecture-dependent libraries?
    (~name ok)
    [/usr/local/lib/perl5/5.8.3/OpenBSD.i386-openbsd]

    Some kernels have a bug that prevents setuid #! scripts from being
    secure. Some sites have disabled setuid #! scripts because of this.

    First let's decide if your kernel supports secure setuid #! scripts.
    (If setuid #! scripts would be secure but have been disabled anyway,
    don't say that they are secure if asked.)

    If you are not sure if they are secure, I can check but I'll need a
    username and password different from the one you are using right now.
    If you don't have such a username or don't want me to test, simply
    enter 'none'.

    Other username to test security of setuid scripts with? [none]
    Well, the recommended value *is* secure.
    Does your kernel have *secure* setuid scripts? [y]

    No need to emulate SUID scripts since they are secure here.

    <malloc.h> found.

    Checking to see how well your C compiler groks the void type...
    Good. It appears to support void to the level perl5 wants.

    Checking to see how big your pointers are...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your pointers are 4 bytes long.

    Do you wish to attempt to use the malloc that comes with perl5? [n]

    Your system wants malloc to return 'void *', it would seem.
    Your system uses void free(), it would seem.

    After perl5 is installed, you may wish to install various
    add-on modules and utilities. Typically, these add-ons will
    be installed under /usr/local with the rest
    of this package. However, you may wish to install such add-ons
    elsewhere under a different prefix.

    If you do not wish to put everything under a single prefix, that's
    ok. You will be prompted for the individual locations; this
    siteprefix
    is only used to suggest the defaults.

    The default should be fine for most people.

    Installation prefix to use for add-on modules and utilities? (~name
    ok)
    [/usr/local]

    The installation process will create a directory for
    site-specific extensions and modules. Most users find it convenient
    to place all site-specific files in this directory rather than in the
    main distribution directory.

    Pathname for the site-specific library files? (~name ok)
    [/usr/local/lib/perl5/site_perl/5.8.3]

    The installation process will also create a directory for
    architecture-dependent site-specific extensions and modules.

    Pathname for the site-specific architecture-dependent library files?
    (~name ok)
    [/usr/local/lib/perl5/site_perl/5.8.3/OpenBSD.i386-openbsd]

    The installation process will also create a directory for
    vendor-supplied add-ons. Vendors who supply perl with their system
    may find it convenient to place all vendor-supplied files in this
    directory rather than in the main distribution directory. This will
    ease upgrades between binary-compatible maintenance versions of perl.

    Of course you may also use these directories in whatever way you see
    fit. For example, you might use them to access modules shared over a
    company-wide network.

    The default answer should be fine for most people.
    This causes further questions about vendor add-ons to be skipped
    and no vendor-specific directories will be configured for perl.

    Do you want to configure vendor-specific add-on directories? [n]

    Lastly, you can have perl look in other directories for extensions
    and
    modules in addition to those already specified.
    These directories will be searched after
    /usr/local/lib/perl5/site_perl/5.8.3/OpenBSD.i386-openbsd
    /usr/local/lib/perl5/site_perl/5.8.3

    Enter a colon-separated set of extra paths to include in perl's @INC
    search path, or enter 'none' for no extra paths.

    Colon-separated list of additional directories for perl to search?
    [none]

    Checking out function prototypes...
    Your C compiler appears to support function prototypes.

    Pathname where the public executables will reside? (~name ok)
    [/usr/local/bin]

    Perl can be built with extra modules or bundles of modules which
    will be fetched from the CPAN and installed alongside Perl.

    Notice that you will need access to the CPAN; either via the
    Internet,
    or a local copy, for example a CD-ROM or a local CPAN mirror. (You
    will
    be asked later to configure the CPAN.pm module which will in turn do
    the installation of the rest of the extra modules or bundles.)

    Notice also that if the modules require any external software such as
    libraries and headers (the libz library and the zlib.h header for the
    Compress::Zlib module, for example) you MUST have any such software
    already installed, this configuration process will NOT install such
    things for you.

    If this doesn't make any sense to you, just accept the default 'n'.
    Install any extra modules (y or n)? [n]


    If you wish to install html files for programs in Perl5, indicate
    the appropriate directory here. To skip installing html files,
    answer "none".
    Directory for the main Perl5 html pages? (~name ok) [none]

    If you wish to install html files for modules associated with Perl5,
    indicate the appropriate directory here. To skip installing html
    files,
    answer "none".
    Directory for the Perl5 module html pages? (~name ok) [none]
    Looking for a previously installed perl5.005 or later...
    Using /usr/bin/perl.

    In order to ease the process of upgrading, this version of perl
    can be configured to use modules built and installed with earlier
    versions of perl that were installed under /usr/local. Specify here
    the list of earlier versions that this version of perl should check.
    If Configure detected no earlier versions of perl installed under
    /usr/local, then the list will be empty. Answer 'none' to tell perl
    to not search earlier versions.

    The default should almost always be sensible, so if you're not sure,
    just accept the default.
    List of earlier versions to include in @INC? [none]

    Many scripts expect perl to be installed as /usr/bin/perl.

    If you want to, I can install the perl you are about to compile
    as /usr/bin/perl (in addition to /usr/local/bin/perl).

    However, please note that because you already have a /usr/bin/perl,
    overwriting that with a new Perl would very probably cause problems.
    Therefore I'm assuming you don't want to do that (unless you insist).

    Do you want to install perl as /usr/bin/perl? [n]

    Checking for GNU C Library...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    You are not using the GNU C Library

    I can use /usr/bin/nm to extract the symbols from your C libraries.
    This
    is a time consuming task which may generate huge output on the disk
    (up
    to 3 megabytes) but that should make the symbols extraction faster.
    The
    alternative is to skip the 'nm' extraction part and to compile a
    small
    test program instead to determine whether each symbol is present. If
    you have a fast C compiler and/or if your 'nm' output cannot be
    parsed,
    this may be the best solution.

    You probably shouldn't let me use 'nm' if you are using the GNU C
    Library.

    Shall I use /usr/bin/nm to extract C symbols from the libraries? [y]

    Your (shared) C library seems to be in /usr/lib/libc.so.30.1.

    If the guess above is wrong (which it might be if you're using a
    strange
    compiler, or your machine supports multiple models), you can override
    it here.

    Where is your C library? [/usr/lib/libc.so.30.1]

    Extracting names from the following files for later perusal:

    /usr/lib/libc.so.30.1
    /usr/lib/libm.so.1.0
    /usr/lib/libutil.so.9.0
    /usr/local/lib/libbind.so.1.0
    /usr/local/lib/libgdbm.so.3.0

    This may take a while.....done.

    <dld.h> NOT found.

    dlopen() found.

    Do you wish to use dynamic loading? [y]
    The following dynamic loading files are available:
    ext/DynaLoader/dl_aix.xs ext/DynaLoader/dl_mac.xs
    ext/DynaLoader/dl_beos.xs ext/DynaLoader/dl_mpeix.xs
    ext/DynaLoader/dl_dld.xs ext/DynaLoader/dl_next.xs
    ext/DynaLoader/dl_dllload.xs ext/DynaLoader/dl_none.xs
    ext/DynaLoader/dl_dlopen.xs ext/DynaLoader/dl_vmesa.xs
    ext/DynaLoader/dl_dyld.xs ext/DynaLoader/dl_vms.xs
    ext/DynaLoader/dl_hpux.xs
    Source file to use for dynamic loading [ext/DynaLoader/dl_dlopen.xs]

    Some systems may require passing special flags to cc -c to
    compile modules that will be used to create a shared library.
    To use no flags, say "none".

    Any special flags to pass to cc -c to compile shared library modules?
    [-DPIC -fPIC ]

    Some systems use ld to create libraries that can be dynamically
    loaded,
    while other systems (such as those using ELF) use cc.

    What command should be used to create dynamic libraries? [cc]

    Some systems may require passing special flags to cc to create a
    library that can be dynamically loaded. If your ld flags include
    - -L/other/path options to locate libraries outside your loader's
    normal
    search path, you may need to specify those -L options here as well.
    To
    use no flags, say "none".

    Any special flags to pass to cc to create a dynamically loaded
    library?
    [-shared -fPIC -L/usr/local/lib]

    Some systems may require passing special flags to cc to indicate that
    the resulting executable will use dynamic linking. To use no flags,
    say "none".

    Any special flags to pass to cc to use dynamic linking? [none]

    The perl executable is normally obtained by linking perlmain.c with
    libperl.a, any static extensions (usually just DynaLoader), and
    any other libraries needed on this system (such as -lm, etc.). Since
    your system supports dynamic loading, it is probably possible to
    build
    a shared libperl.so. If you will have more than one executable
    linked
    to libperl.so, this will significantly reduce the size of each
    executable, but it may have a noticeable affect on performance. The
    default is probably sensible for your system.


    Build a shared libperl.so (y/n) [n]

    System manual is in /usr/share/man/man1.

    Perl5 has manual pages available in source form.
    If you don't want the manual sources installed, answer 'none'.

    Where do the main Perl5 manual pages (source) go? (~name ok)
    [/usr/local/man/man1]
    What suffix should be used for the main Perl5 man pages? [1]

    You can have filenames longer than 14 characters.

    Perl5 has manual pages for many of the library modules.
    If you don't want the manual sources installed, answer 'none'.

    Where do the perl5 library man pages (source) go? (~name ok)
    [/usr/local/man/man3]
    What suffix should be used for the perl5 library man pages? [3]

    Figuring out host name...
    Maybe "hostname" will work...
    Your host name appears to be "bsd.missions.kjv.ljc". Right? [y]
    (Trimming domain name from host name--host name is now bsd)

    What is your domain name? [.missions.kjv.ljc]

    I need to get your e-mail address in Internet format if possible,
    i.e.
    something like . Please answer accurately since I
    have
    no easy means to double check it. The default value provided below
    is most probably close to reality but may not be valid from outside
    your organization...

    What is your e-mail address? []

    If you or somebody else will be maintaining perl at your site, please
    fill in the correct e-mail address here so that they may be contacted
    if necessary. Currently, the "perlbug" program included with perl
    will send mail to this address in addition to . You
    may
    enter "none" for no administrator.

    Perl administrator e-mail address []

    Do you want to install only the version-specific parts of the perl
    distribution? Usually you do *not* want to do this.
    Do you want to install only the version-specific parts of perl? [n]

    I can use the #! construct to start perl on your system. This will
    make startup of perl scripts faster, but may cause problems if you
    want to share those scripts and perl is not in a standard place
    (/usr/local/bin/perl) on all your platforms. The alternative is to
    force
    a shell by starting the script with a single ':' character.

    What shall I put after the #! to start up perl ("none" to not use
    #!)?
    [/usr/local/bin/perl]
    I'll use #!/usr/local/bin/perl to start perl scripts.

    Some installations have a separate directory just for executable
    scripts so
    that they can mount it across multiple architectures but keep the
    scripts in
    one spot. You might, for example, have a subdirectory of /usr/share
    for this.
    Or you might just lump your scripts in with all your other
    executables.

    Where do you keep publicly executable scripts? (~name ok)
    [/usr/local/bin]
    Pathname where the add-on public executables should be installed?
    (~name ok)
    [/usr/local/bin]
    Pathname where the site-specific html pages should be installed?
    (~name ok)
    [none]
    Pathname where the site-specific library html pages should be
    installed? (~name ok)
    [none]
    Pathname where the site-specific manual pages should be installed?
    (~name ok)
    [/usr/local/man/man1]
    Pathname where the site-specific library manual pages should be
    installed? (~name ok)
    [/usr/local/man/man3]
    Pathname where add-on public executable scripts should be installed?
    (~name ok)
    [/usr/local/bin]

    Perl can be built to use 'fast stdio', which means using the stdio
    library but also directly manipulating the stdio buffers to enable
    faster I/O. Using stdio is better for backward compatibility
    (especially
    for Perl extensions), but on the other hand since Perl 5.8 the
    'perlio'
    interface has been preferred instead of stdio.

    If this doesn't make any sense to you, just accept the default 'y'.
    Use the "fast stdio" if available? [y]

    Looking for the type used for lseek's offset on this system.
    off_t found.

    Checking to see how big your file offsets are...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your file offsets are 8 bytes long.

    Looking for the type for file position used by fsetpos().
    fpos_t found.

    Checking the size of fpos_t...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your fpos_t is 8 bytes long.

    You can have files larger than 2 gigabytes.

    qgcvt() NOT found.

    Checking how to print long doubles...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    We will use %Lf.

    Checking for an efficient way to convert floats to strings.
    Trying gconvert...
    gconvert NOT found.
    Trying gcvt...
    gcvt() found.
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    gcvt oddity: Expected 0.1, got .1
    ....But gcvt didn't work as I expected.
    Trying sprintf...
    sprintf() found.
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    I'll use sprintf to convert floats into a string.

    fwalk() NOT found.

    access() found.

    <sys/file.h> defines the *_OK access constants.

    accessx() NOT found.

    aintl() NOT found.

    alarm() found.

    <pthread.h> found.

    <sys/types.h> found.

    <sys/select.h> found.

    Testing to see if we should include <time.h>, <sys/time.h> or both.
    I'm now running the test program....
    Succeeded with -DI_SYSTIME -DS_TIMEVAL
    We'll include <sys/time.h>.

    Checking to see if your struct tm has tm_zone field...
    Yes, it does.

    Checking to see if your struct tm has tm_gmtoff field...
    Yes, it does.

    asctime_r() found.

    atolf() NOT found.

    atoll() found.

    Checking whether your compiler can handle __attribute__ ...
    Your C compiler supports __attribute__.

    bcmp() found.

    bcopy() found.

    <unistd.h> found.

    getpgrp() found.

    Checking to see which flavor of getpgrp is in use...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    (I see you are running Configure as super-user...)
    You have to use getpgrp() instead of getpgrp(pid).

    setpgrp() found.

    Checking to see which flavor of setpgrp is in use...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    (I see you are running Configure as super-user...)
    You have to use setpgrp(pid,pgrp) instead of setpgrp().

    bzero() found.

    You have void (*signal())().

    Checking whether your C compiler can cast large floats to int32.
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Nope, it can't.

    Checking whether your C compiler can cast negative float to unsigned.
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Yup, it can.

    vprintf() found.
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your vsprintf() returns (int).

    chown() found.

    chroot() found.

    chsize() NOT found.

    class() NOT found.

    Hmm... Looks like you have Berkeley networking support.

    socketpair() found.

    Checking the availability of certain socket constants...

    <sys/uio.h> found.

    Checking to see if your system supports struct cmsghdr...
    Yes, it does.

    Checking to see if your C compiler knows about "const"...
    Yup, it does.

    copysignl() NOT found.


    crypt() found.

    <crypt.h> NOT found.

    crypt_r() NOT found.

    ctermid_r() found.

    ctime_r() found.

    cuserid() NOT found.

    <limits.h> found.

    <float.h> found.

    DBL_DIG found.

    dbmclose() found.

    <dbm.h> found.

    dbminit() prototype found.

    difftime() found.

    <dirent.h> found.

    Your directory entries are struct dirent.

    Good, your directory entry keeps length information in d_namlen.

    <sys/dir.h> found.

    <sys/ndir.h> NOT found.

    dirfd() found.

    dlerror() found.

    <dlfcn.h> found.

    On a few systems, the dynamically loaded modules that perl generates
    and uses
    will need a different extension than shared libs. The default will
    probably
    be appropriate.

    What is the extension of dynamically loaded modules [so]

    Checking whether your dlsym() needs a leading underscore ...
    ../fred:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_class_syms) size mismatch, relink your program
    ../fred:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_type_syms) size mismatch, relink your program
    dlsym doesn't need a leading underscore.

    drand48_r() NOT found.

    drand48() prototype found.

    dup2() found.

    eaccess() NOT found.

    endgrent() found.

    <grp.h> found.

    endgrent_r() NOT found.

    endhostent() found.

    <netdb.h> found.

    endhostent_r() NOT found.

    endnetent() found.

    endnetent_r() NOT found.

    endprotoent() found.

    endprotoent_r() NOT found.

    endpwent() found.

    <pwd.h> found.

    endpwent_r() NOT found.

    endservent() found.

    endservent_r() NOT found.

    <sys/file.h> defines the O_* constants...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    and you have the 3 argument form of open().

    Using <string.h> instead of <strings.h>.

    <sys/file.h> found.

    We'll be including <sys/file.h>.

    <fcntl.h> found.

    We don't need to include <fcntl.h> if we include <sys/file.h>.

    Figuring out the flag used by open() for non-blocking I/O...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Seems like we can use O_NONBLOCK.

    Let's see what value errno gets from read() on a O_NONBLOCK file...
    A read() system call with no data present returns
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    - -1.
    (That's peculiar, fixing that to be -1.)
    Your read() sets errno to EAGAIN when no data is available.
    And it correctly returns 0 to signal EOF.

    (Looks like you have stdio.h from BSD.)
    Checking how std your stdio is...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your stdio acts pretty std.
    Checking to see what happens if we set the stdio ptr...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Increasing ptr in your stdio leaves cnt unchanged. Good.
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    And its _base field acts std.
    You seem to have 'fast stdio' to directly manipulate the stdio
    buffers.

    fchdir() found.

    fchmod() found.

    fchown() found.

    fcntl() found.

    Checking if fcntl-based file locking works...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Yes, it seems to work.

    Checking to see how well your C compiler handles fd_set and friends
    ....
    Well, your system knows about the normal fd_set typedef...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    and you have the normal fd_set macros (just as I'd expect).

    fgetpos() found.

    finite() found.

    finitel() NOT found.

    flock() found.

    flock() prototype found.

    fork() found.

    fp_class() NOT found.

    pathconf() found.

    fpathconf() found.

    fpclass() NOT found.

    fpclassify() NOT found.

    fpclassl() NOT found.

    Checking to see if you have fpos64_t...
    You do not have fpos64_t.
    (Your fpos_t is 64 bits, so you could use that.)

    frexpl() NOT found.

    <sys/param.h> found.

    <sys/mount.h> found.

    Checking to see if your system supports struct fs_data...
    No, it doesn't.

    fseeko() found.

    fsetpos() found.

    fstatfs() found.

    statvfs() NOT found.

    fstatvfs() NOT found.

    fsync() found.

    ftello() found.

    getcwd() found.

    getespwnam() NOT found.

    getfsstat() found.

    getgrent() found.

    getgrent_r() NOT found.

    getgrgid_r() found.

    getgrnam_r() found.

    gethostbyaddr() found.

    gethostbyname() found.

    gethostent() found.

    gethostname() found.
    uname() found.

    Every now and then someone has a gethostname() that lies about the
    hostname
    but can't be fixed for political or economic reasons. If you wish, I
    can
    pretend gethostname() isn't there and maybe compute hostname at
    run-time
    thanks to the 'hostname' command.

    Shall I ignore gethostname() from now on? [n]

    gethostbyaddr_r() NOT found.

    gethostbyname_r() NOT found.

    gethostent_r() NOT found.

    gethostent() prototype found.

    getitimer() found.

    getlogin() found.

    getlogin_r() found.

    getmnt() NOT found.

    getmntent() NOT found.

    getnetbyaddr() found.

    getnetbyname() found.

    getnetent() found.

    getnetbyaddr_r() NOT found.

    getnetbyname_r() NOT found.

    getnetent_r() NOT found.

    getnetent() prototype found.

    getpagesize() found.

    getprotobyname() found.

    getprotobynumber() found.

    getprotoent() found.

    getpgid() found.

    getpgrp2() NOT found.

    getppid() found.

    getpriority() found.

    getprotobyname_r() NOT found.

    getprotobynumber_r() NOT found.

    getprotoent_r() NOT found.

    getprotoent() prototype found.

    getprpwnam() NOT found.

    getpwent() found.

    getpwent_r() NOT found.

    getpwnam_r() NOT found.

    getpwuid_r() NOT found.

    getservbyname() found.

    getservbyport() found.

    getservent() found.

    getservbyname_r() found.

    getservbyport_r() NOT found.

    getservent_r() NOT found.

    getservent() prototype found.

    getspnam() NOT found.

    <shadow.h> NOT found.

    getspnam_r() NOT found.

    gettimeofday() found.

    gmtime_r() found.

    hasmntopt() NOT found.

    <netinet/in.h> found.

    <arpa/inet.h> found.

    htonl() found.

    ilogbl() NOT found.

    strchr() found.

    inet_aton() found.

    isascii() found.

    isfinite() NOT found.

    isinf() found.

    isnan() found.

    isnanl() NOT found.

    killpg() found.

    lchown() found.

    LDBL_DIG found.

    link() found.

    localtime_r() found.

    localeconv() found.

    lockf() found.

    lseek() prototype found.

    lstat() found.

    madvise() found.

    mblen() found.

    mbstowcs() found.

    mbtowc() found.

    memchr() found.

    memcmp() found.

    memcpy() found.

    memmove() found.

    memset() found.

    mkdir() found.

    mkdtemp() found.

    mkfifo() found.

    mkstemp() found.

    mkstemps() found.

    mktime() found.

    <sys/mman.h> found.

    mmap() found.
    and it returns (caddr_t).

    sqrtl() NOT found.

    scalbnl() NOT found.

    modfl() NOT found.

    modfl() prototype NOT found.

    mprotect() found.

    msgctl() found.

    msgget() found.

    msgsnd() found.

    msgrcv() found.

    You have the full msg*(2) library.

    Checking to see if your system supports struct msghdr...
    Yes, it does.

    msync() found.

    munmap() found.

    nice() found.

    <langinfo.h> found.

    nl_langinfo() found.

    Checking to see how big your characters are (hey, you never know)...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    What is the size of a character (in bytes)? [1]

    Checking to see if your C compiler knows about "volatile"...
    Yup, it does.

    Choosing the C types to be used for Perl's internal types...
    (IV will be long, 4 bytes)
    (UV will be unsigned long, 4 bytes)
    (NV will be double, 8 bytes)
    Checking how many bits of your UVs your NVs can preserve...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your NVs can preserve all 32 bits of your UVs.

    Checking to see if you have off64_t...
    You do not have off64_t.
    (Your off_t is 64 bits, so you could use that.)

    pause() found.

    pipe() found.

    poll() found.

    readlink() found.


    pthread_attr_setscope() NOT found.

    random_r() NOT found.

    readdir() found.

    seekdir() found.

    telldir() found.

    rewinddir() found.

    readdir64_r() NOT found.

    readdir_r() found.

    readv() found.

    recvmsg() found.

    rename() found.

    rmdir() found.

    <memory.h> found.

    We won't be including <memory.h>.

    I'll use memmove() instead of bcopy() for overlapping copies.

    I'll use memmove() instead of memcpy() for overlapping copies.

    Checking if your memcmp() can compare relative magnitude...
    Yes, it can.

    sbrk() prototype found.

    select() found.

    semctl() found.

    semget() found.

    semop() found.

    You have the full sem*(2) library.

    You have union semun in <sys/sem.h>.

    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    You can use union semun for semctl IPC_STAT.
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    You can also use struct semid_ds* for semctl IPC_STAT.

    sendmsg() found.

    setegid() found.

    seteuid() found.

    setgrent() found.

    setgrent_r() NOT found.

    sethostent() found.

    sethostent_r() NOT found.

    setitimer() found.

    setlinebuf() found.

    setlocale() found.

    <locale.h> found.

    setlocale_r() NOT found.

    setnetent() found.

    setnetent_r() NOT found.

    setprotoent() found.

    setpgid() found.

    setpgrp2() NOT found.

    setpriority() found.

    setproctitle() found.

    setprotoent_r() NOT found.

    setpwent() found.

    setpwent_r() NOT found.

    setregid() found.

    setresgid() found.

    setreuid() found.

    setresuid() found.

    setrgid() NOT found.

    setruid() NOT found.

    setservent() found.

    setservent_r() NOT found.

    setsid() found.

    setvbuf() found.

    <sfio.h> NOT found.

    shmctl() found.

    shmget() found.

    shmat() found.
    and it returns (char *).

    shmdt() found.

    You have the full shm*(2) library.

    sigaction() found.

    sigprocmask() found.

    POSIX sigsetjmp found.

    sockatmark() NOT found.

    sockatmark() prototype NOT found.

    socks5_init() NOT found.

    srand48_r() NOT found.

    srandom_r() NOT found.

    setresgid() prototype found.

    setresuid() prototype found.

    <sys/stat.h> found.

    Checking to see if your struct stat has st_blocks field...

    <sys/vfs.h> NOT found.

    <sys/statfs.h> NOT found.

    Checking to see if your system supports struct statfs...
    Yes, it does.

    Checking to see if your struct statfs has f_flags field...
    Yes, it does.
    Checking how to access stdio streams by file descriptor number...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    You can access stdio streams by file descriptor number by the __sF
    array.

    strcoll() found.

    Checking to see if your C compiler can copy structs...
    Yup, it can.

    strerror() found.
    (You also have sys_errlist[], so we could roll our own strerror.)

    strerror_r() found.

    strftime() found.

    strtod() found.

    strtol() found.

    strtold() NOT found.

    strtoll() found.
    Checking whether your strtoll() works okay...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your strtoll() seems to be working okay.

    strtoq() found.

    strtoul() found.
    Checking whether your strtoul() works okay...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your strtoul() seems to be working okay.

    strtoull() found.
    Checking whether your strtoull() works okay...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your strtoull() seems to be working okay.

    strtouq() found.
    Checking whether your strtouq() works okay...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your strtouq() seems to be working okay.

    strxfrm() found.

    symlink() found.

    syscall() found.

    syscall() prototype found.

    sysconf() found.

    system() found.

    tcgetpgrp() found.

    tcsetpgrp() found.

    telldir() prototype found.

    time() found.

    Looking for the type returned by time() on this system.
    time_t found.

    <sys/times.h> found.

    times() found.

    Looking for the type returned by times() on this system.
    clock_t found.

    tmpnam_r() NOT found.

    truncate() found.

    ttyname_r() found.

    tzname[] found.

    In the following, larger digits indicate more significance. A
    big-endian
    machine like a Pyramid or a Motorola 680?0 chip will come out to
    4321. A
    little-endian machine like a Vax or an Intel 80?86 chip would be
    1234. Other
    machines may have weird orders like 3412. A Cray will report
    87654321,
    an Alpha will report 12345678. If the test program works the default
    is
    probably right.
    I'm now running the test program...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    (The test program ran ok.)
    byteorder=1234

    Checking to see whether you can access character data unalignedly...
    (Testing for character data alignment may crash the test. That's
    okay.)
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    You can access character data pretty unalignedly.

    ualarm() found.

    umask() found.

    unordered() NOT found.

    usleep() found.

    usleep() prototype found.

    ustat() NOT found.

    vfork() found.


    Perl can only use a vfork() that doesn't suffer from strict
    restrictions on calling functions or modifying global data in
    the child. For example, glibc-2.1 contains such a vfork()
    that is unsuitable. If your system provides a proper fork()
    call, chances are that you do NOT want perl to use vfork().

    Do you still want to use vfork()? [y]

    closedir() found.

    Checking whether closedir() returns a status...
    Yes, it does.

    wait4() found.

    waitpid() found.

    wcstombs() found.

    wctomb() found.

    writev() found.

    Checking alignment constraints...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Doubles must be aligned on a how-many-byte boundary? [4]

    Checking to see how your cpp does stuff like concatenate tokens...
    Oh! Smells like ANSI's been here.
    We can catify or stringify, separately or together!

    <db.h> found.

    Checking Berkeley DB version ...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    You have Berkeley DB Version 1.
    Looks OK.
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program

    Checking return type needed for hash for Berkeley DB ...
    Your version of Berkeley DB uses u_int32_t for hash.

    Checking return type needed for prefix for Berkeley DB ...
    Your version of Berkeley DB uses size_t for prefix.

    Looking for a random number function...
    Good, found drand48().

    Use which function to generate random numbers? [drand48]

    Determining whether or not we are on an EBCDIC system...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8.

    Checking how to flush all pending stdio output...
    Your fflush(NULL) works okay for output streams.
    Let's see if it clobbers input pipes...
    fflush(NULL) seems to behave okay with input streams.

    Looking for the type for group ids returned by getgid().
    gid_t found.

    Checking the size of gid_t...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your gid_t is 4 bytes long.

    Checking the sign of gid_t...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your gid_t is unsigned.

    Checking how to print 64-bit integers...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    We will use the %lld style.

    Checking the format strings to be used for Perl's internal types...

    Checking the format string to be used for gids...

    getgroups() found.

    setgroups() found.

    What type of pointer is the second argument to getgroups() and
    setgroups()?
    Usually this is the same as group ids, gid_t, but not always.

    What type pointer is the second argument to getgroups() and
    setgroups()?
    [gid_t]

    Checking if your /usr/bin/make program sets $(MAKE)...
    Yup, it does.

    Looking for the type used for file modes for system calls (e.g.
    fchmod()).
    mode_t found.

    <stdarg.h> found.

    <varargs.h> found.

    We'll include <stdarg.h> to get va_dcl definition.

    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    It seems that you don't need va_copy().

    Looking for the type used for the length parameter for string
    functions.
    size_t found.

    Checking to see what type of arguments are accepted by
    gethostbyaddr().
    Your system accepts const char * for the first arg.
    ....and int for the second arg.

    Checking to see what type of argument is accepted by gethostbyname().
    Your system accepts const char *.

    Checking to see what type of 1st argument is accepted by
    getnetbyaddr().
    Your system accepts in_addr_t.

    What pager is used on your system? [/usr/bin/less]

    Looking for the type of process ids on this system.
    pid_t found.

    Checking how to generate random libraries on your machine...
    /usr/bin/ar appears to generate random libraries itself.

    Checking to see what type of arguments are accepted by select().
    Your system accepts fd_set *.

    Checking to see on how many bits at a time your select() operates...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your select() operates on 32 bits at a time.

    Generating a list of signal names and numbers...
    ../signal:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_class_syms) size mismatch, relink your program
    ../signal:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_type_syms) size mismatch, relink your program
    The following 32 signals are available:

    SIGZERO SIGHUP SIGINT SIGQUIT SIGILL SIGTRAP SIGABRT SIGEMT SIGFPE
    SIGKILL SIGBUS SIGSEGV SIGSYS SIGPIPE SIGALRM SIGTERM SIGURG SIGSTOP
    SIGTSTP SIGCONT SIGCHLD SIGTTIN SIGTTOU SIGIO SIGXCPU SIGXFSZ
    SIGVTALRM SIGPROF SIGWINCH SIGINFO SIGUSR1 SIGUSR2 SIGIOT

    Checking the size of size_t...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your size_t size is 4 bytes.

    Checking to see if you have socklen_t...
    You have socklen_t.

    <socks.h> NOT found.

    Checking to see what type is the last argument of accept().
    Your system accepts 'socklen_t *' for the last argument of accept().

    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    I'll be using ssize_t for functions returning a byte count.

    Your stdio uses signed chars.

    Looking for the type for user ids returned by getuid().
    uid_t found.

    Checking the size of uid_t...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your uid_t is 4 bytes long.

    Checking the sign of uid_t...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your uid_t is unsigned.

    Checking the format string to be used for uids...

    Which compiler compiler (yacc) shall I use? [yacc]

    <fp.h> NOT found.

    <fp_class.h> NOT found.

    <ieeefp.h> found.

    <libutil.h> NOT found.

    <math.h> found.

    <mntent.h> NOT found.

    <ndbm.h> found.

    dbm_open() found.

    <net/errno.h> NOT found.

    <netinet/tcp.h> found.

    <poll.h> found.

    <prot.h> NOT found.

    Guessing which symbols your C compiler and preprocessor define...
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_class_syms) size mismatch, relink your program
    ../try:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 : WARNING:
    symbol(__p_type_syms) size mismatch, relink your program
    Your C compiler and pre-processor define these symbols:
    __ELF__
    __GNUC__
    __OpenBSD__
    __i386__
    __unix__

    Your C pre-processor also defines the following symbols:
    BIG_ENDIAN
    __GNUC_MINOR__
    LITTLE_ENDIAN
    __STDC__

    Your C compiler further defines the following cpp symbols:
    __GNUC_MINOR__=95
    cpu=i386
    machine=i386
    system=OpenBSD
    system=unix

    tcsetattr() found.

    You have POSIX termios.h... good!

    <stddef.h> found.

    <sunmath.h> NOT found.

    <sys/access.h> NOT found.

    <sys/filio.h> found.

    <sys/ioctl.h> found.

    You have socket ioctls defined in <sys/sockio.h>.

    <syslog.h> found.

    <sys/mode.h> NOT found.

    <sys/resource.h> found.

    <sys/security.h> NOT found.

    <sys/statvfs.h> NOT found.

    <sys/un.h> found.

    <sys/utsname.h> found.

    <sys/wait.h> found.

    <ustat.h> NOT found.

    <utime.h> found.

    <values.h> NOT found.

    <vfork.h> NOT found.

    <gdbm.h> found.

    gdbm_open() found.

    Looking for extensions...
    A number of extensions are supplied with perl5. You may choose to
    compile these extensions for dynamic loading (the default), compile
    them into the perl5 executable (static loading), or not include
    them at all. Answer "none" to include no extensions.
    Note that DynaLoader is always built and need not be mentioned here.

    What extensions do you wish to load dynamically?
    [B ByteLoader Cwd DB_File Data/Dumper Devel/DProf Devel/PPPort
    Devel/Peek Digest/MD5 Encode Fcntl File/Glob Filter/Util/Call
    GDBM_File I18N/Langinfo IO IPC/SysV List/Util MIME/Base64 NDBM_File
    ODBM_File Opcode POSIX PerlIO/encoding PerlIO/scalar PerlIO/via
    SDBM_File Socket Storable Sys/Hostname Sys/Syslog Time/HiRes
    Unicode/Normalize XS/APItest XS/Typemap attrs re threads
    threads/shared]
    What extensions do you wish to load statically? [none]


    End of configuration questions.


    Stripping down executable paths...

    Creating config.sh...
    Hmm...You had some extra variables I don't know about...I'll try to
    keep 'em...
    Propagating recommended variable $ARCH...

    Doing variable substitutions on .SH files...
    Extracting cflags (with variable substitutions)
    Extracting config.h (with variable substitutions)
    Extracting makeaperl (with variable substitutions)
    Extracting makedepend (with variable substitutions)
    Extracting makedir (with variable substitutions)
    Extracting Makefile (with variable substitutions)
    Extracting myconfig (with variable substitutions)
    Extracting pod/Makefile (with variable substitutions)
    Extracting Policy.sh (with variable substitutions)
    Extracting writemain (with variable substitutions)
    Extracting x2p/cflags (with variable substitutions)
    Extracting x2p/Makefile (with variable substitutions)

    Now you need to generate make dependencies by running "make depend".
    You might prefer to run it in background: "make depend >
    makedepend.out &"
    It can take a while, so you might not want to run it right now.

    Run make depend now? [y]
    sh ./makedepend MAKE=make
    sh writemain lib/auto/DynaLoader/DynaLoader.a > writemain.tmp
    sh mv-if-diff writemain.tmp perlmain.c
    echo av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c reentr.c
    perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
    utf8.c gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c
    xsutils.c pad.c globals.c perlio.c perlapi.c numeric.c locale.c
    pp_pack.c pp_sort.c miniperlmain.c perlmain.c | tr ' ' '\n' >.clist
    Finding dependencies for av.o.
    Finding dependencies for scope.o.
    Finding dependencies for op.o.
    Finding dependencies for doop.o.
    Finding dependencies for doio.o.
    Finding dependencies for dump.o.
    Finding dependencies for hv.o.
    Finding dependencies for mg.o.
    Finding dependencies for reentr.o.
    Finding dependencies for perl.o.
    Finding dependencies for perly.o.
    Finding dependencies for pp.o.
    Finding dependencies for pp_hot.o.
    Finding dependencies for pp_ctl.o.
    Finding dependencies for pp_sys.o.
    Finding dependencies for regcomp.o.
    Finding dependencies for regexec.o.
    Finding dependencies for utf8.o.
    Finding dependencies for gv.o.
    Finding dependencies for sv.o.
    Finding dependencies for taint.o.
    Finding dependencies for toke.o.
    Finding dependencies for util.o.
    Finding dependencies for deb.o.
    Finding dependencies for run.o.
    Finding dependencies for universal.o.
    Finding dependencies for xsutils.o.
    Finding dependencies for pad.o.
    Finding dependencies for globals.o.
    Finding dependencies for perlio.o.
    Finding dependencies for perlapi.o.
    Finding dependencies for numeric.o.
    Finding dependencies for locale.o.
    Finding dependencies for pp_pack.o.
    Finding dependencies for pp_sort.o.
    Finding dependencies for miniperlmain.o.
    Finding dependencies for perlmain.o.
    echo Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH
    makedir.SH myconfig.SH writemain.SH pod/Makefile.SH | tr ' ' '\n'
    >.shlist

    Updating makefile...
    test -s perlmain.c && touch perlmain.c
    cd x2p; make depend
    sh ../makedepend MAKE=make
    echo hash.c str.c util.c walk.c | tr ' ' '\n' >.clist
    Finding dependencies for hash.o.
    Finding dependencies for str.o.
    Finding dependencies for util.o.
    Finding dependencies for walk.o.
    echo Makefile.SH cflags.SH | tr ' ' '\n' >.shlist
    Updating makefile...
    Now you must run 'make'.

    If you compile perl5 on a different machine or from a different
    object
    directory, copy the Policy.sh file from this object directory to the
    new one before you run Configure -- this will help you with most of
    the policy defaults.

    bash-2.05b# vi INSTALL
    bash-2.05b# make && make test && make install
    `sh cflags "optimize='-O2'" miniperlmain.o` miniperlmain.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" perl.o` perl.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" gv.o` gv.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" toke.o` toke.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" perly.o` perly.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" op.o` op.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" pad.o` pad.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" regcomp.o` regcomp.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" dump.o` dump.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" util.o` util.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" mg.o` mg.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" reentr.o` reentr.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" hv.o` hv.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" av.o` av.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" run.o` run.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" pp_hot.o` pp_hot.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" sv.o` sv.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" pp.o` pp.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" scope.o` scope.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" pp_ctl.o` pp_ctl.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" pp_sys.o` pp_sys.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" doop.o` doop.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" doio.o` doio.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" regexec.o` regexec.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" utf8.o` utf8.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" taint.o` taint.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" deb.o` deb.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" universal.o` universal.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" xsutils.o` xsutils.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" globals.o` globals.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" perlio.o` perlio.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" perlapi.o` perlapi.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" numeric.o` numeric.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" locale.o` locale.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" pp_pack.o` pp_pack.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    `sh cflags "optimize='-O2'" pp_sort.o` pp_sort.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    rm -f libperl.a
    /usr/bin/ar rcu libperl.a perl.o gv.o toke.o perly.o op.o pad.o
    regcomp.o dump.o util.o mg.o reentr.o hv.o av.o run.o pp_hot.o sv.o
    pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o utf8.o taint.o
    deb.o universal.o xsutils.o globals.o perlio.o perlapi.o numeric.o
    locale.o pp_pack.o pp_sort.o
    rm -f opmini.c
    cp op.c opmini.c
    `sh cflags "optimize='-O2'" opmini.o` -DPERL_EXTERNAL_GLOB opmini.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall
    rm -f opmini.c
    cc -Wl,-E -L/usr/local/lib -o miniperl miniperlmain.o opmini.o
    libperl.a -lbind -lm -lutil -lc
    ../miniperl -w -Ilib -MExporter -e '<?>' || make minitest
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_class_syms) size mismatch, relink your program
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_type_syms) size mismatch, relink your program
    *** Error code 1 (ignored)
    ../miniperl -Ilib configpm configpm.tmp
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_class_syms) size mismatch, relink your program
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_type_syms) size mismatch, relink your program
    sh mv-if-diff configpm.tmp lib/Config.pm
    ../miniperl -Ilib lib/lib_pm.PL
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_class_syms) size mismatch, relink your program
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_type_syms) size mismatch, relink your program
    Extracting lib.pm (with variable substitutions)
    AutoSplitting perl library
    ../miniperl -Ilib -e 'use AutoSplit; autosplit_lib_modules(@ARGV)'
    lib/*.pm
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_class_syms) size mismatch, relink your program
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_type_syms) size mismatch, relink your program
    ../miniperl -Ilib -e 'use AutoSplit; autosplit_lib_modules(@ARGV)'
    lib/*/*.pm
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_class_syms) size mismatch, relink your program
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_type_syms) size mismatch, relink your program
    make lib/re.pm
    cp ext/re/re.pm ext/re/re.tmp && sh mv-if-diff ext/re/re.tmp
    lib/re.pm
    ../miniperl minimod.pl > minimod.tmp
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_class_syms) size mismatch, relink your program
    ../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_type_syms) size mismatch, relink your program
    sh mv-if-diff minimod.tmp lib/ExtUtils/Miniperl.pm
    touch lib/ExtUtils/Miniperl.pm
    `sh cflags "optimize='-O2'" perlmain.o` perlmain.c
    CCCMD = cc -DPERL_CORE -c -fno-strict-aliasing
    - -I/usr/local/include -O2 -Wall

    Making DynaLoader (static)
    .../../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_class_syms) size mismatch, relink your program
    .../../miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    WARNING: symbol(__p_type_syms) size mismatch, relink your program
    Processing hints file hints/openbsd.pl
    Writing Makefile for DynaLoader
    Perl lib version (v5.8.3) doesn't match executable version (v5.8.0)
    at ../../lib/Config.pm line 32.
    Compilation failed in require at ../../lib/File/Copy.pm line 15.
    BEGIN failed--compilation aborted at ../../lib/File/Copy.pm line 15.
    Compilation failed in require at ../../lib/ExtUtils/Command.pm line
    6.
    BEGIN failed--compilation aborted at ../../lib/ExtUtils/Command.pm
    line 6.
    Compilation failed in require.
    BEGIN failed--compilation aborted.
    *** Error code 255

    Stop in /home/jeffrey/perl-5.8.3/ext/DynaLoader (line 418 of
    Makefile).
    make config failed, continuing anyway...
    Perl lib version (v5.8.3) doesn't match executable version (v5.8.0)
    at ../../lib/Config.pm line 32.
    Compilation failed in require at ../../lib/File/Copy.pm line 15.
    BEGIN failed--compilation aborted at ../../lib/File/Copy.pm line 15.
    Compilation failed in require at ../../lib/ExtUtils/Command.pm line
    6.
    BEGIN failed--compilation aborted at ../../lib/ExtUtils/Command.pm
    line 6.
    Compilation failed in require.
    BEGIN failed--compilation aborted.
    *** Error code 255

    Stop in /home/jeffrey/perl-5.8.3/ext/DynaLoader (line 418 of
    Makefile).
    *** Error code 1

    Stop in /home/jeffrey/perl-5.8.3 (line 571 of makefile).

    -----BEGIN PGP SIGNATURE-----
    Version: PGP 8.0.3

    iQIVAwUBQEneN/1+O1j6RefsAQITyQ//UbzEwSU5CXRoOscW7kHOqwBHuwB0KI4E
    BuiEmkLvxpM8WDxYDAtBX+CaUT3ypbutPxuyoAfRSOjeEXOms9PwyW3syVH2M8lV
    mhj/C0xsxJUZoemQW4/o5whWLhgKFcExRt1moBHz/pb755dWzHDZge+Be9reOWeU
    lhbsgaEy53Mg0fbzwQNXZAgoSIw3MwUtBhZmethXpCf7zWzgpL0MFa8NENiwFDo3
    Kqiz3Owcy/dPnqf0E7mDkLNGnTCX1ychY5HbVmkIfg173uX5gzyveLzLGX/rANDO
    9XY3ArzDNcqCYHvV6WfxG6sbzd6KRnfqFwKPuPwdRQZZINP3sGGL/Yt5djYru2yy
    jfXEdYaxY/MOErDvPO1NKhmjrVgm1GxxPeT4+w2KeJMQBfmdEjfNV3yPNGmjp0C/
    0Zw+rDEC4atYjOjye3GoTyBBPyTfS6+yJwAhaVP7GBwTbcZvajViI5/M684hZWzC
    mjM6CaGhoP49IskvF24n1PKIYP3LNwUT1zMRrhYeav5DE2VVYvCP7/k3vyVcjLqA
    ZjtDTeXO+J6LsNhimGkdG5C35TPIu9/dbU1EQr/rfQgARJ9MdQsgNGK2mP3Jr3Ti
    UixKSUWbxUEnyc7Kv8/OQQTrHzraSkYe2SMIuqmHaEoKhcp8Fm6xBtJOOTprw0jK
    TB4JY5FoKUg=
    =jHBG
    -----END PGP SIGNATURE-----
     
    Newsgroup User, Mar 6, 2004
    #1
    1. Advertising

  2. Newsgroup User

    Ben Morrow Guest

    "Newsgroup User" <> wrote:
    >
    > -----BEGIN PGP SIGNED MESSAGE-----


    What is the point of signing a message when you don't even give your
    real name???

    > I am running OpenBSD 3.4 and this is the optput from the compilation
    > process:
    >

    <snip the WHOLE of Configure>
    >
    > cc -Wl,-E -L/usr/local/lib -o miniperl miniperlmain.o opmini.o
    > libperl.a -lbind -lm -lutil -lc
    > ./miniperl -w -Ilib -MExporter -e '<?>' || make minitest
    > ./miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    > WARNING: symbol(__p_class_syms) size mismatch, relink your program


    You really don't need to include that much output. Where I snipped to is
    quite sufficient.

    It looks to me like /usr/local/lib/libbind.so.1.0 is not compatible with
    your libc: where does it come from?

    Ben

    --
    The cosmos, at best, is like a rubbish heap scattered at random.
    - Heraclitus
     
    Ben Morrow, Mar 6, 2004
    #2
    1. Advertising

  3. It looks to me that the file inquestion came from the standard
    libbind-9.2.2.tgz that is distributed with OpenBSD 3.4 . Maybe I have
    added my lib packages in the wrong order and an older or incorrect
    version has overwritten the proper libbind.so?

    I must admit that I am new to the Perl and BSD environments, and
    maybe I should be asking other questions that I do not know before
    moving on to subjects such as this?

    This time, my post should be corrected to reflect my name

    > > cc -Wl,-E -L/usr/local/lib -o miniperl miniperlmain.o opmini.o
    > > libperl.a -lbind -lm -lutil -lc
    > > ./miniperl -w -Ilib -MExporter -e '<?>' || make minitest
    > > ./miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    > > WARNING: symbol(__p_class_syms) size mismatch, relink your
    > > program

    >
    > You really don't need to include that much output. Where I snipped
    > to is quite sufficient.
    >
    > It looks to me like /usr/local/lib/libbind.so.1.0 is not compatible
    > with your libc: where does it come from?
    >
    > Ben
    >
    > --
    > The cosmos, at best, is like a rubbish heap scattered at random.
    > -
    > Heraclitus
    >
     
    Jeffrey A. LaPointe, Mar 6, 2004
    #3
  4. Newsgroup User

    Ben Morrow Guest

    [quoting fixed]

    "Jeffrey A. LaPointe" <> wrote:
    > > > cc -Wl,-E -L/usr/local/lib -o miniperl miniperlmain.o opmini.o
    > > > libperl.a -lbind -lm -lutil -lc
    > > > ./miniperl -w -Ilib -MExporter -e '<?>' || make minitest
    > > > ./miniperl:/usr/lib/libc.so.30.1: /usr/local/lib/libbind.so.1.0 :
    > > > WARNING: symbol(__p_class_syms) size mismatch, relink your
    > > > program

    > >
    > > You really don't need to include that much output. Where I snipped
    > > to is quite sufficient.
    > >
    > > It looks to me like /usr/local/lib/libbind.so.1.0 is not compatible
    > > with your libc: where does it come from?

    >
    > It looks to me that the file inquestion came from the standard
    > libbind-9.2.2.tgz that is distributed with OpenBSD 3.4 . Maybe I have
    > added my lib packages in the wrong order and an older or incorrect
    > version has overwritten the proper libbind.so?


    Hmmm, I don't know. I would be somwhat surpised if a 'system' library
    was in /usr/local/lib, but then I don't know much about OpenBSD. Can you
    install perl using the package manglement system (ports?) rather than by
    hand? Otherwise, I think you'd be better off in some OpenBSD group or
    mailing-list.

    > This time, my post should be corrected to reflect my name


    Yup, now learn to quote properly: i.e., put your replies underneath what
    you are replying to.

    Ben

    --
    Although few may originate a policy, we are all able to judge it.
    - Pericles of Athens, c.430 B.C.
     
    Ben Morrow, Mar 6, 2004
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Archevis
    Replies:
    1
    Views:
    889
    John M. Nordgaard
    Oct 16, 2003
  2. Joshua
    Replies:
    8
    Views:
    6,108
    Joshua
    Sep 29, 2004
  3. Steph L
    Replies:
    2
    Views:
    894
    Alan Coopersmith
    Oct 28, 2003
  4. Newsgroup User

    REQ: Perl 5.8.3 on OpenBSD

    Newsgroup User, Mar 6, 2004, in forum: Perl Misc
    Replies:
    0
    Views:
    110
    Newsgroup User
    Mar 6, 2004
  5. johannes falcone
    Replies:
    0
    Views:
    72
    johannes falcone
    Feb 20, 2014
Loading...

Share This Page