Malcolm McLean wrote, On 29/04/07 10:29:
aki said:
Hi all,
i am receiving a buffer from network...
there are n number of options in buffer type char*
each option contain thr fields of fixed size.
1)type
2)length
3)value
example->
struct authProt
{
uint8_t type;
uint8_t length;
uint16_t authprot;
};
have created a char array of pointers to point to all these n
options.
char *options[n];
then how to decode each field of an option.
all comments are welcome....
option string
"10 15 1001"
Unless, as is quite likely IMHO from the way the OP described it, it is
coming in as binary not text. The OP has not been explicit, so it is
possibly your interpretation of the requirement is correct and mine wrong.
to decode
int type;
int len;
int ap;
sscanf(options[n], "%d %d %d", &type, &len, &ap);
Then in your structure
struct authProt auth;
auth.type = (unit8_t) type;
auth.length = (uint8_t) length;
auth.authprot = (uint16_t) ap;
The casting above is completely pointless.
You could use strtol instead of sscanf. Strictly you should use a long
for ap if it can go over 32767, and you need error checking in sccanf.
You only need the special fixed types in the actual structure. Elsewhere
you can manipulate the information with plain types, and often these
will be better. For instance if legal types go from 1-100, and someone
feeds 123456789012345678901234567890 to the function, a conversion to
integer is much more likely to pick up the error than a conversion to an
8 bit value, handy if you have "good enough" error checking.
With scanf it still invokes undefined behaviour if the number is out of
range, so it is still difficult to get error checking with sscanf, so I
think strtoul/strtol would still be better.
If, as I suspect, the data is coming in as binary, then you can do
things like:
#define TYPE_OFFSET 0
#define LENGTH_OFFSET 1
#define AUTH_PROT 2
mess.type = buff[TYPE_OFFSET];
mess.len = buff[LENGTH_OFFSET];
mess.auth = buff[AUTH_PROT] << 8 + buff[AUTH_PROT+1];
Adjust for the endianness of the incoming data (you do not need to worry
about the endianness of the receiving machine doing it this way). You
might want to write either small functions or macros to wrap up the
extraction of 16 bit unsigned integers, 32 bit unsigned integers etc.
char is not guaranteed to be 8 bits (although the chances of the OPs
system not using 8 bits bytes is slim), but I'm assuming here that even
if it is not the octets of the network data are being put in to separate
bytes on the receiving system which is why I used 8 rather than CHAR_BIT.
