EURASIP JASP - Special issue on Signal Processing in AdvancedNondestructive Materials Inspection - A




(Apologies for cross-posting.)

EURASIP Journal on Advances in Signal Processing
Special issue on Signal Processing in Advanced Nondestructive
Materials Inspection
Announce and Call for papers

We would appreciate if you could distribute this information by your
colleagues and co-workers.


Dear Colleague,

Nowadays, techniques of nondestructive testing (NDT) have evolved
greatly due to recent advances in microelectronics and signal
processing and analysis. For example, many image processing and
analysis techniques can now be readily applied at standard video rates
using commercially available hardware, in particular, to methods that
generate TV-type image sequences, such as real-time radiography, pulse-
video thermography, ultrasonic-phased array, laser ultrasonics, and

The main objective of this special issue on “Signal processing in
nondestructive materials inspection” (
asp/si/ndt.html) of the EURASIP Journal on Advances in Signal
Processing ( is to promote a
comprehensive forum for discussion on the recent advances in signal
processing techniques applied to nondestructive material inspection.

Topics of interest include (not limited to):

- Signal processing and analysis in advanced NDT;
- Image processing and analysis in advanced NDT;
- Materials characterization using advanced NDT;
- Defect detection and characterization using advanced NDT;
- Pattern recognition and classification for advanced NDT;
- 3D image reconstruction from advanced NDT data;
- Applications of advanced NDT;
- Algorithms development for signal processing and analysis in
advanced NDT;
- Software development for defect detection and characterization in
NDT images.

Submission Instructions:

Before submission authors should carefully read over the journal's
Author Guidelines, which are located at
Prospective authors should submit an electronic copy of their complete
manuscript through the journal Manuscript Tracking System at according to the following timetable:

Manuscript Due: January 1, 2010;
First Round of Reviews: April 1, 2010;
Publication Date: July 1, 2010.

Best regards,

João Manuel R. S. Tavares, Department of Mechanical Engineering,
Faculty of Engineering, University of Porto, Portugal
([email protected])
(Lead Guest Editor)

João Marcos A. Rebello, Department of Metallurgy and Materials,
Technological Center, Faculty of Engineering, Federal University of
Rio de Janeiro, Brazil ([email protected])
(Guest Editor)


Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question